Cisco Systems MGX 8220 manual Clearing Any Alarms Related to ds3, LMI Interface, VPI/VCI Mapping

Contents

				AUSM Connections	5-6
				Via Cisco WAN Manager			5-6
				Via the Command-Line Interface					5-6
				CESM Connections	5-7
				Via the Command-Line Interface					5-8
				FRASM Connections	5-8
				Via the Command-Line Interface					5-8
				FRAS BNN Connections 5-9
				STUN Connections		5-10
				BSTUN Connections		5-12
				Configuring IMATM Connections				5-14
				Download procedure		5-14
				Adding the Line	5-14
				Checking the Alarms on a ds1 Line					5-15
				Clearing Any Alarms Related to ds3 5-15
				PLCP Configuration for ds3			5-17
				Configuring the Clock Source			5-18
				Commands Related to AIM Group					5-20
				Add the Channel Route Entry				5-20
				Configuring the Port Queue			5-22
				MGX 8220 in Stand-alone Applications
C H A P T E R		6							6-1
				Using the Command-Line Interface				6-1
				In-band Access	6-2
				Out-of-Band Access		6-2
				LMI Interface 6-2
				Configuring the BNM	6-2
				Setting Trap Managers		6-3
				VPI/VCI Mapping 6-3
				VC Connections	6-4
				VP Connections	6-4
				Provisioning FRSM Channels			6-5
				Provisioning AUSM Channels			6-5
				Installation and Start-Up
C H A P T E R		7				7-1
				Safety Recommendations		7-1
			Cisco MGX 8220 Installation and Configuration
	x								Release 5.0, Part Number 78-6430-03 Rev. D0, November 2003