Cisco Systems M SFS7000E specifications Contents

Page 1

Cisco M SFS7000E Installation Note: InfiniBand Blade Switch for the Dell Modular Server Chassis

This document provides instructions on how to install the Cisco M SFS7000E InfiniBand Switch in the Dell Modular Server Chassis. The Dell Modular Server Chassis is a system that supports up to sixteen server modules and up to four InfiniBand switches. You may install the InfiniBand switch in one of four chassis I/O module bays on the rear panel of the server chassis.

Note There are six chassis I/O module bays on the rear panel of the server chassis. The InfiniBand switches are supported in the middle four bays that are connected to Fabrics B and C.

For details about the number, types, and location of the module bays and for additional information about the entire modular server system, see the documentation for the Dell PowerEdge Servers at www.support.dell.com.

Contents

This publication includes the following sections:

Safety Overview, page 2

Parts List, page 3

Switch Description, page 4

I/O Module Bays and HCA Expansion Cards, page 5

Pre-installation Guidelines, page 6

Installing the Cisco M SFS7000E InfiniBand Switch, page 6

Removing the Cisco M SFS7000E InfiniBand Switch, page 11

Connecting InfiniBand Cables, page 11

External LED Specifications, page 14

Americas Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

© 2007 Cisco Systems, Inc. All rights reserved.

Image 1
Contents Contents Safety Overview One warranty card Parts ListCisco M SFS7000E InfiniBand Switch Switch DescriptionHCA Mezzanine Card HCA InfiniBand Port Bay Module Bays and HCA Expansion CardsInstalling the Cisco M SFS7000E InfiniBand Switch Pre-installation GuidelinesChassis I/O Module Bays Connector Cover Switch Handle in Open Position Release latch Switch handleInserting the Switch into the Server Chassis Connecting InfiniBand Cables Removing the Cisco M SFS7000E InfiniBand SwitchInfiniBand Cable with Pinch Connector Removing Cable with a Pinch Connector InfiniBand Cable with Pull ConnectorRemoving Cable with a Pull Connector LED Indicators on Switch External LED SpecificationsSwitch Status Power LED Indicator InfiniBand Port Status LED IndicatorsSystem Status LED Indicator External Network Management RequirementsSäilytä Nämä Ohjeet Bewaar Deze InstructiesConservez CES Informations Conservare Queste Istruzioni Bewahren SIE Diese Hinweise GUT AUFTA Vare PÅ Disse Instruksjonene Guarde Estas InstruçõesSpara Dessa Anvisningar GEM Disse Anvisninger Page Related Documentation