Cisco Systems M SFS7000E External Network Management Requirements, System Status LED Indicator

External Network Management Requirements

InfiniBand Port Status LEDs

A port status LED indicator (green) exists next to each IB port on the

Cisco M SFS7000E InfiniBand Switch, as shown in Figure 11. Table 2 describes IB port status LED indicators. The eight ports on the IB switch module are numbered next to each LED indicator.

Table 2	InfiniBand Port Status LED Indicators
LED State		Indicators
On (solid)		Logical link exists
Blinking		Traffic active
Off		Link error or Subnet Manager is not running

Switch Status LEDs

Each IB switch module includes two LEDs (one green and one bi-color, blue and amber), as shown in Figure 11. The power LED and the system status LED provide the overall system status for the Cisco M SFS7000E InfiniBand Switch and are controlled by the Dell Remote Access Controller/Modular Chassis (DRAC/MC) management board. The DRAC/MC checks whether or not the switch blade is valid and has correct identifiers. Table 3 describes the green-colored power LED indicator. Table 4 describes the bi-colored system status LED indicator.

Table 3 Switch Status Power LED Indicator

LED States		Indicators
On		Power is on
Off		Power is off
Table 4	System Status LED Indicator
LED States		Indicators
Blue off		Switch is not ready
Blue blinking		Identify
Blue solid on		Switch is on and operating normally
Amber blinking		Indicates fault
Amber solid on		Indicates fault

External Network Management Requirements

You can manage the Cisco M SFS7000E InfiniBand Switch in an InfiniBand network by using the Cisco High-Performance Subnet Manager or the Cisco Embedded Subnet Manager.

Cisco M SFS7000E Installation Note: InfiniBand Blade Switch for the Dell Modular Server Chassis

78-18371-01 15