Cisco Systems M SFS7000E Release latch Switch handle, Switch Handle in Open Position

Page 9

Installing the Cisco M SFS7000E InfiniBand Switch

Step 4 Press the release latch upward so the switch handle springs open and is perpendicular to the module. (See Figure 5.)

Figure 5

Switch Handle in Open Position

M SFS7000E

1

2

TX/RX

TX/RX

TX/RX

TX/RX

TX/RX

TX/RX

TX/RX

250397 TX/RX

1

Release latch

2

Switch handle

Cisco M SFS7000E Installation Note: InfiniBand Blade Switch for the Dell Modular Server Chassis

	78-18371-01	9

Image 9

Contents Contents Safety Overview One warranty card Parts ListCisco M SFS7000E InfiniBand Switch Switch DescriptionHCA Mezzanine Card HCA InfiniBand Port Bay Module Bays and HCA Expansion CardsInstalling the Cisco M SFS7000E InfiniBand Switch Pre-installation GuidelinesChassis I/O Module Bays Connector Cover Switch Handle in Open Position Release latch Switch handleInserting the Switch into the Server Chassis Removing the Cisco M SFS7000E InfiniBand Switch Connecting InfiniBand CablesInfiniBand Cable with Pinch Connector Removing Cable with a Pinch Connector InfiniBand Cable with Pull ConnectorRemoving Cable with a Pull Connector LED Indicators on Switch External LED SpecificationsSwitch Status Power LED Indicator InfiniBand Port Status LED IndicatorsSystem Status LED Indicator External Network Management RequirementsBewaar Deze Instructies Säilytä Nämä OhjeetConservez CES Informations Conservare Queste Istruzioni Bewahren SIE Diese Hinweise GUT AUFTA Vare PÅ Disse Instruksjonene Guarde Estas InstruçõesSpara Dessa Anvisningar GEM Disse Anvisninger Page Related Documentation