Cisco Systems M SFS7000E specifications Inserting the Switch into the Server Chassis

Page 10

Installing the Cisco M SFS7000E InfiniBand Switch

Step 5 Slide the switch completely into the selected bay until it stops, and then rotate the switch handle upward until it is secured by the release latch.

Figure 6 shows the switch being inserted into the server chassis and the direction in which to rotate the switch handle to secure it.

Figure 6		Inserting the Switch into the Server Chassis
	!
		!
		!
M	SFS7000E	!
	SFS7000E
	D
		!
TX/RX
TX/RX
TX/RX		!
		!
TX/RX		!
TX/RX
TX/RX
		!
TX/RX
		!
TX/RX

!

!

!

!

!		250400
	!

Cisco M SFS7000E Installation Note: InfiniBand Blade Switch for the Dell Modular Server Chassis

10	78-18371-01

Image 10

Contents Contents Safety Overview Parts List One warranty cardSwitch Description Cisco M SFS7000E InfiniBand SwitchModule Bays and HCA Expansion Cards HCA Mezzanine Card HCA InfiniBand Port BayPre-installation Guidelines Installing the Cisco M SFS7000E InfiniBand SwitchChassis I/O Module Bays Connector Cover Release latch Switch handle Switch Handle in Open PositionInserting the Switch into the Server Chassis Connecting InfiniBand Cables Removing the Cisco M SFS7000E InfiniBand SwitchInfiniBand Cable with Pinch Connector InfiniBand Cable with Pull Connector Removing Cable with a Pinch ConnectorRemoving Cable with a Pull Connector External LED Specifications LED Indicators on SwitchSystem Status LED Indicator InfiniBand Port Status LED IndicatorsSwitch Status Power LED Indicator External Network Management RequirementsSäilytä Nämä Ohjeet Bewaar Deze InstructiesConservez CES Informations TA Vare PÅ Disse Instruksjonene Bewahren SIE Diese Hinweise GUT AUFConservare Queste Istruzioni Guarde Estas InstruçõesSpara Dessa Anvisningar GEM Disse Anvisninger Page Related Documentation