Cisco Systems M SFS7000E specifications Removing Cable with a Pull Connector

Page 13

Connecting InfiniBand Cables

To remove a cable with a pull connector, grasp the connector with one hand and push it toward the port, and then pull the latch away from the port with your other hand while gently wiggling the connector away from the port, as shown in Figure 10.

Figure 10 Removing Cable with a Pull Connector

Hold here

Pull here

Hold here

250424

Note The Cisco M SFS7000E InfiniBand Switch also supports optical connections through external pluggable optical modules.

Cisco M SFS7000E Installation Note: InfiniBand Blade Switch for the Dell Modular Server Chassis

	78-18371-01	13

Image 13

Contents Contents Safety Overview One warranty card Parts ListCisco M SFS7000E InfiniBand Switch Switch DescriptionHCA Mezzanine Card HCA InfiniBand Port Bay Module Bays and HCA Expansion CardsInstalling the Cisco M SFS7000E InfiniBand Switch Pre-installation GuidelinesChassis I/O Module Bays Connector Cover Switch Handle in Open Position Release latch Switch handleInserting the Switch into the Server Chassis Connecting InfiniBand Cables Removing the Cisco M SFS7000E InfiniBand SwitchInfiniBand Cable with Pinch Connector Removing Cable with a Pinch Connector InfiniBand Cable with Pull ConnectorRemoving Cable with a Pull Connector LED Indicators on Switch External LED SpecificationsSwitch Status Power LED Indicator InfiniBand Port Status LED IndicatorsSystem Status LED Indicator External Network Management RequirementsSäilytä Nämä Ohjeet Bewaar Deze InstructiesConservez CES Informations Conservare Queste Istruzioni Bewahren SIE Diese Hinweise GUT AUFTA Vare PÅ Disse Instruksjonene Guarde Estas InstruçõesSpara Dessa Anvisningar GEM Disse Anvisninger Page Related Documentation