Connecting InfiniBand Cables
Figure 8 | InfiniBand Cable with Pull Connector |
250422
Note If the free space around a given IB port is tight, verify that your IB cable connector engages completely. Wiggle the connector back and forth to be sure that both sides of the connector have locked firmly into place.
To remove a cable with a pinch connector, pinch both sides of the back of the connector, as shown in Figure 9, and pull the connector away from the port.
Figure 9 | Removing Cable with a Pinch Connector |
Press here
Press here
250423
Cisco M SFS7000E Installation Note: InfiniBand Blade Switch for the Dell Modular Server Chassis
12 |
| |
|