Cisco Systems ME-C6524GS-8S important safety instructions

Regulatory Compliance and Safety Information for the Cisco ME 6500 Series Ethernet Switch

Read this document before installing or servicing the following systems:

•ME-C6524GS-8S(=)

•ME-C6524GT-8S(=)

Note Only trained and qualified service personnel (as defined in IEC 60950-1 and AS/NZS 60950) should install, replace, or service the equipment. Install the system in accordance with the U.S. National Electric Code if you are in the United States.

Warning IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071

SAVE THESE INSTRUCTIONS

This document includes the following sections:

•Translated Safety Warnings, page 2

•European Directives, page 33

•California Perchlorate Contamination Prevention Act (Title 22, California Code of Regulations, Chapter 33), page 35

•EMC Environmental Conditions for Products Installed in the European Union, page 37

•EMC Class A Notices and Warnings, page 38

•Optional Cautions, page 40

•Obtaining Documentation, page 40

Americas Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

© 2006–2007 Cisco Systems, Inc. All rights reserved.