
EMC Environmental Conditions for Products Installed in the European Union
For specific details about the years, revisions, and relevant amendments, refer to the applicable declaration of conformity available at http://www.cisco.com.
The Cisco ME 6500 series Ethernet switch meets the industry EMC, safety, and environmental standards described in Table 2.
Table 2 | Industry EMC, Safety, and Environmental Standards | |
|
|
|
Specification |
| Description |
|
|
|
NEBS |
| |
|
| |
|
|
|
ETSI |
| ETS 300 |
|
| ETS 300 |
|
| ETS 300 |
|
|
|
EMC Environmental Conditions for Products Installed in the European Union
This section applies to products to be installed in the European Economic Union.
The equipment is intended to operate under the following environmental conditions with respect to EMC:
•A separate, defined location that is under user’s control.
•As a minimum, earthing and bonding shall meet the requirements of ETS 300 253:1995 or CCITT K27:1996.
•AC power distribution inside the building shall be, as a minimum, one of the following types (as defined in IEC
–
–
–TT
–IT
In addition, if equipment is operated in a domestic environment,
Regulatory Compliance and Safety Information for the Cisco ME 6500 Series Ethernet Switch
|
| 37 |
|
|
|