C H A P T E R 4
Configuring Ethernet Management Port
This module contains the following sections:
•Finding Feature Information, page 45
•Prerequisites for Ethernet Management Ports, page 45
•Information about the Ethernet Management Port, page 45
•How to Configure the Ethernet Management Port, page 47
•Additional References, page 48
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.
Prerequisites for Ethernet Management Ports
When connecting a PC to the Ethernet management port, you must first assign an IP address.
Information about the Ethernet Management Port
The Ethernet management port, also referred to as the Fa0 or fastethernet0 port, is a Layer 3 host port to which you can connect a PC. You can use the Ethernet management port instead of the switch console port for network management. When managing a switch stack, connect the PC to the Ethernet management port on a stack member.
Catalyst
45 |