Configuring PoE
Configuring Power Policing
| Command or Action | Purpose |
Step 2 | no cdp run | (Optional) Disables CDP. |
| Example: |
|
| Switch(config)# no cdp run |
|
Step 3 | interface | Specifies the physical port to be configured, and enter |
|
| interface configuration mode. |
| Example: |
|
| Switch(config)# interface gigabitethernet2/0/1 |
|
Step 4 | power inline consumption wattage |
Example:
Step 5 | end |
Example:
Configures the power consumption of a powered device connected to a PoE port on the switch.
The range for each device is 4000 to 30000 mW (PoE+). The default is 30000 mW.
Returns to privileged EXEC mode.
Step 6 | show power inline consumption | Displays the power consumption data. |
Example:
Switch# show power inline consumption
Configuring Power Policing
By default, the switch monitors the
Catalyst
85 |