Cisco Systems Cisco SFS 7000P manual Diagnostics

Chapter 1 Product Overview

Administrative Features

•Manufacturing part number

•Serial number

•Final test date

•Card ID

•Failure code

•Failure date

•Operation status

•Failure log

•OEM part number

Diagnostics

The following tests are used to determine operational status:

•Power-on self-test (POST) is performed on all system components and is required during power-on to determine operational readiness.

•Test to check the redundant components’ operational status periodically during normal operation, including the logic required to perform the transition from faulted or primary to redundant component. The detection of an abnormal status is reported.

•Concurrent port loopback tests are available, including the capability to wrap an external signal from input port to output port.

Refer to Chapter 5, “Hardware Diagnostic Tests,” for more detailed information.

	Cisco SFS 7000P Hardware Installation Guide
1-6	OL-9167-01 Rev. A0