Cisco Systems Cisco SFS 7000P manual Using the Summary Tab, Health Status Window

Chapter 4 Managing the Cisco SFS 7000P Switch

Managing the System with Element Manager

To view the Health Status window, perform the following steps:

Step 1 Launch the Element Manager.

Step 2 Select Health > Status. The Health Status window opens. (See Figure 4-3.)

Figure 4-3 Health Status Window

Using the Summary Tab

Use the Summary tab (See Figure 4-3.) to view the status of the power, fans, and temperature sensors at once.

The Summary tab has the following fields:

•Power

–A green check indicates that at least one power source is connected and functioning properly.

–A red check indicates that the power supply AC is disconnected.

•Fans

–A green check indicates that at least one fan is present, and is functioning properly.

–A red check indicates a fan failure.

•Sensors

–A green check indicates that the system temperature is at an acceptable level.

	Cisco SFS 7000P Hardware Installation Guide
4-4	OL-9167-01 Rev. A0