Cisco Systems Cisco SFS 7000P manual Running Chassis Tests, Running a Chassis Standard Test

Chapter 5 Hardware Diagnostic Tests

Running Chassis Tests

Step 2 Exit the test to view the progress of the test.

The test takes approximately 5 to 8 minutes.

SFS-7000P#show diagnostic card 1

======================================================================

Diagnostic Tests For Cards

======================================================================

test : self-test slot-id : 1

iterations : 1 action : start result : success

percentage-completed : 100

result-string : Card Test Completed, Final report : Passed=1, Failed=0, Total=1

Step 3 If the test fails, enter the more syslog:hwif_log command to see the log information.

Running Chassis Tests

The following tests are available to locate and diagnose the chassis:

•LED

•Standard

•Extended

•Extended Memory

Running a Chassis Standard Test

The chassis standard test runs a diagnostic test on all cards in the chassis. To perform a chassis standard test on a card, follow these steps:

Step 1	Start the test by entering the diag chassis test standard command and the start
	command.
	Cisco SFS 7000P Hardware Installation Guide
OL-9167-01 Rev. A0		5-3