Cisco Systems 4490 manual Configuring a Modem, Figure B-1 Console Port Connector

Appendix B Connecting a Modem to the GSS 4490 Console Port

Configuring a Modem

Configuring a Modem

You must configure the modem before you can connect it to the GSS 4490. You can connect the modem to a terminal or a PC using a terminal emulation program, such as Hyperterminal. If you connect the modem to the COM port on a PC, you need the following cable and connectors:

•RJ-45-to-RJ-45 rolled cable

•RJ-45-to-DB-25 modem adapter

•DB-9-to-RJ-45 terminal adapter

Figure B-1shows the pin number assignments for the 9-pin, male D-shell console port connector on the back of the GSS 4490. These pin number assignments conform to the industry standard.

Figure B-1 Console Port Connector

15

83193

69

Table B-1connector pinouts for the GSS 4490 console port.

Table B-1 Console Port Connector Pinouts

		Pin Number	Signal Name
1			DCD (Data Carrier Detect)
2			RD (Receive Data)
3			TD (Transmit Data)
4			DTR (Data Terminal Ready)
5			SG (Signal Ground)
6			DSR (Data Set Ready)
7			RTS (Request to Send)
8			CTS (Clear to Send)
9			RI (Ring Indicator)
	Cisco Global Site Selector 4490 Hardware Installation Guide
B-2			78-15755-01