Teac CD-RW900CD owner manual Playback operations, Discs for playback, Simple playback operations

Page 15

4−Playback operations

The CD-RW900 can be used to play back CDs (includ- ing CD-R and CD-RW discs that have been recorded and finalized on other types of recorder), as well as CD-R discs and CD-RW discs that have been recorded on the unit.

Audio files in MP3 format on CD-ROM, CD-R and CD- RW are also playable on the unit.

Discs for playback

The CD discs in the CD-RW900 can play back the types of discs listed below.

≠Commercial pre-recorded CDs recorded in CD-DA format.

≠CD-R and CD-RW discs that have been recorded in CD-DA format and finalized properly.

≠MP3 files recorded in ISO9660 level 1 and level 2 format on CD-R and CD-RW discs, and properly finalized. MP3 files recorded in the format which adheres to Joliet, are also playable.

Simple playback operations

1Press the POWER switch to turn on the unit.

2Press the OPEN/CLOSE key to open the disc tray. The display shows Open. Insert a disc in the tray with the label side up.

3Press the OPEN/CLOSE key to close the tray. The display shows Close when a disc is loaded into the unit, then TOC Reading. will appear, with the period flashing.

When the TOC has been read, the display shows the number of tracks and total running time of the disc.

4Press the PLAY key to start playback.

Adjust the connected monitor system, or the level control for the PHONES on the unit to set the listen- ing level you desire.

WARNING

If you monitoring using headphones, adjust the level control to low on the unit, then connect to the PHONES jack before playing back. This will prevent any possible damage for your hearing.

5To stop playback, press the STOP key.

 

Disc type

 

 

 

Temporarily stop playback and enter playback

 

 

 

 

 

 

 

 

 

 

 

standby mode, press the READY key. To resume

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

playback, press the PLAY key again.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The explanation in this manual will assume the user is

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

starting from the normal Continuous mode.

Total number of tracks

Total running time

 

The CD-RW900 also shows one of the following:

TOC A disc finalized

MP3 A disc contains MP3 files

Track selection

Using the skip function

Skipping track numbers backward or forward.

1Select desired tracks for playback with the MULTI JOG dial on the front panel. Turning clockwise skips the track number backward and counterclockwise skips forward.

Or, press the SKIP key on the remote control. Pressing ¯ key skips the track number backward and  key skips forward.

2Press the PLAY key to start playback.

Or, press the READY key to cue the track and enter playback standby mode after moving to the head of the selected track. To start playback, press the PLAY key.

TASCAM CD-RW900 15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents CD-RW900 Appliance to Rain or Moisture Important Safety PrecautionsImportant Safety Instructions Optical pickup Safety InformationContents Rack-mounting the unit Supplied accessories− Introduction About this manualRecordable discs About CD-R and CD-RW discsEnvironmental considerations Use of the remote control unit Front panel − Features of the CD-RW900Rear panel RC-RW900 Remote control unit Menu configuration − Menu operationOperation basics −Menu operation Simple playback operations Using the skip function−Playback operations Discs for playbackDirect search Track searchSelecting by track number Normal searchProgram playback Playback modesContinuous playback Single-track playbackRandom playback Time display switchingTimer playback Repeat playbackTo B repeat playback Pitch control functionKey control function Directory playback setting Playing back MP3 filesAbout MP3 track data Frequency conversion −RecordingInput selection Input monitoringBasic recording Time display while recordingFull disc Sync recording Advanced recordingFade-in and fade-out recording Synchronaized recordingAutomatic track division − Advanced Recording Rec mute functionManually divide track After recording FinalizingUnfinalizing CD-RW discs Erasing a whole disc ErasingRefreshing a disc Erasing tracksTrack title input −TitlingTitle input operation Disc title input／ œ Keyboard type settingTitle input by keyboard Other keyboard operationsTroublshooting Reference and specificationsError messages Messages during operationsSpecifications Dimensional drawing32 Ø CD-RW900

CD-RW900CD specifications

The Teac CD-RW900CD is a sophisticated piece of audio equipment designed for music enthusiasts and recording professionals alike. This versatile machine stands out in the crowded marketplace of CD recorders, primarily due to its combination of user-friendly features, high-quality sound reproduction, and durable build.

One of the key features of the CD-RW900CD is its ability to record on CD-R and CD-RW discs, providing flexibility for both permanent and rewritable media. This allows users to create custom compilations, record live performances, or archive audio collections with ease. The recorder is equipped with a high-precision CD transport mechanism, which ensures reliable playback and recording while minimizing jitter, a critical factor in maintaining sound quality.

The device boasts an impressive 24-bit/192 kHz audio resolution, enabling the capture of rich sound details during the recording process. This high-resolution capability makes it an ideal choice for audiophiles who demand clarity and fidelity in their music. Moreover, the built-in Analog to Digital Converter (ADC) enhances the quality of recordings from analog sources such as vinyl records, cassette tapes, and other audio equipment.

Another standout feature is the CD-RW900CD's intuitive interface, which includes a large, backlit LCD screen that displays essential information such as track numbers, remaining recording time, and input levels. Users can easily navigate through various settings and options thanks to the straightforward controls, making the device accessible even for those who are new to audio recording.

For added convenience, the device supports various input options, including RCA connectors for analog sources and optical digital inputs for high-quality digital audio. Furthermore, the CD-RW900CD is equipped with a built-in stereo microphone input, allowing for straightforward audio capturing of live events or spontaneous recordings.

In terms of connectivity, the Teac CD-RW900CD offers RCA output for connection to external audio systems, enabling users to enjoy their recorded music through high-fidelity speakers. With its robust construction and sleek design, this CD recorder not only performs well functionally but also looks appealing in any studio or home audio setup.

In summary, the Teac CD-RW900CD combines advanced recording technology with user-friendly features, making it a standout choice for anyone looking to create high-quality audio recordings. Its versatility, sound fidelity, and ease of use make it a valuable addition to the toolkit of both amateur and professional musicians.
Top Page Image Contents