Teac CD-RW900CD owner manual To B repeat playback, Pitch control function, Key control function

Page 19

4−Playback operations

A to B repeat playback

If a specific portion between two points on the disc is specified, that portion can be played back repeatedly.

1During playback, press the A-B key on the remote control at the beginning of the desired portion on the disc.

REPEAT indicator lights up in the display and the A- indicator will flashes.

2At the end of the desired portion on the disc, press the A-B key again.

Then, REPEAT and A-Bindicator light up in the dis- play, and the desired A-B section will be played back repeatedly.

NOTE

You can also operate this function during playback standby.

3To cancel the A-B repeat mode and resume normal playback, press the A-B key once again.

REPEAT and A-Bindicator will turn off.

NOTE

≠A-B repeat mode cannot function For MP3 discs.

≠In Random and Program modes, A-B repeat cannot function when the specified A-B section spans more than one track, and does not function for MP3 discs.

≠When the STOP key is pressed, the specified A-B section is cancelled.

Pitch control function

When playing back an audio CD, the pitch (or speed) of the playback can be varied. Pitch can be varied +/- 16%.

1During stop, press the PITCH key on the remote control to turn on the Pitch control function.

Or, use the PITCH option in the PLAY sub-menu to turn on (refer to “Operation basics” on page 14)

The current pitch value appears on the display for seconds and the PITCH indicator will light up.

2Press the MENU key and select the PITCH CONT option in the PLAY sub-menu to set the desired value and push the MULTI JOG dial to enter.

Pitch>XXX will appear on the dispaly.

Then, rotate the MULTI JOG dial to set the desired value.

NOTE

Use the PITCH STEP option in the PLAY sub-menu to

adjust the pitch value steps from 0.1% to 1.0% in 0.1% increments (default: 0.1%)

3Press the MENU key or push the MULTI JOG dial to enter and return to normal mode.

During playback, the pitch control playback can be off temporally. Press the PITCH key on the remote control or use the PITCH option in the PLAY sub- menu to turn the function off.

Pitch>OFF appears on the display and the pitch control playback will be off temporally, until the func- tion is re-set again.

To resume the pitch control playback, press the PITCH key again or use the PITCH option.

NOTE

≠When turning the pitch control on and off during playback, sound output is cut for a short instant.

≠Pitch control cannot be applied for MP3 discs.

Key control function

The key of the music can be changed during stop, play- back or playback standby mode. However, please note that this feature does not operate with MP3 discs.

1Press the MENU key to select the KEY option in the PLAY sub-menu (refer to “Operation basics” on page 14) to enter the function.

The KEY indicator will light up.

2Call up the KEY LEVEL option in the PLAY sub- menu to adjust the playback key level.

The playback key can be raised or lowered 1/2 oc- tave in half-tone increments. Selection values: 0 (no change), â1 to â6, ã1 to ã6.

3Rotate the MULTI JOG dial to select the desired key level and push to enter.

NOTE

≠In this condition, when a CD is played back, the key of the music is changed while the speed of the mu- sic remains the same.

≠Even when the power is turned off, the key change setting is retained.

≠When the Key control function is on, even if the Pitch control function is used to change the play- back speed, the key of playback will remain fixed at the preset key {even if the key level is 0 (zero)}, the Key control function can be turned on.

≠When using the key control function, playback sound may occasionally sound as vibrating. This is a result of a special process applied to CD playback sound and is normal.

TASCAM CD-RW900 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents CD-RW900 Appliance to Rain or Moisture Important Safety PrecautionsImportant Safety Instructions Optical pickup Safety InformationContents Rack-mounting the unit Supplied accessories− Introduction About this manualRecordable discs About CD-R and CD-RW discsEnvironmental considerations Use of the remote control unit Front panel − Features of the CD-RW900Rear panel RC-RW900 Remote control unit − Menu operation Menu configurationOperation basics −Menu operation Simple playback operations Using the skip function−Playback operations Discs for playbackDirect search Track searchSelecting by track number Normal searchProgram playback Playback modesContinuous playback Single-track playbackRandom playback Time display switchingTimer playback Repeat playbackPitch control function To B repeat playbackKey control function Playing back MP3 files Directory playback settingAbout MP3 track data Frequency conversion −RecordingInput selection Input monitoringTime display while recording Basic recordingFull disc Sync recording Advanced recordingFade-in and fade-out recording Synchronaized recordingAutomatic track division Rec mute function − Advanced RecordingManually divide track Finalizing After recordingUnfinalizing CD-RW discs Erasing a whole disc ErasingRefreshing a disc Erasing tracksTrack title input −TitlingTitle input operation Disc title input／ œ Keyboard type settingTitle input by keyboard Other keyboard operationsTroublshooting Reference and specificationsError messages Messages during operationsDimensional drawing Specifications32 Ø CD-RW900

CD-RW900CD specifications

The Teac CD-RW900CD is a sophisticated piece of audio equipment designed for music enthusiasts and recording professionals alike. This versatile machine stands out in the crowded marketplace of CD recorders, primarily due to its combination of user-friendly features, high-quality sound reproduction, and durable build.

One of the key features of the CD-RW900CD is its ability to record on CD-R and CD-RW discs, providing flexibility for both permanent and rewritable media. This allows users to create custom compilations, record live performances, or archive audio collections with ease. The recorder is equipped with a high-precision CD transport mechanism, which ensures reliable playback and recording while minimizing jitter, a critical factor in maintaining sound quality.

The device boasts an impressive 24-bit/192 kHz audio resolution, enabling the capture of rich sound details during the recording process. This high-resolution capability makes it an ideal choice for audiophiles who demand clarity and fidelity in their music. Moreover, the built-in Analog to Digital Converter (ADC) enhances the quality of recordings from analog sources such as vinyl records, cassette tapes, and other audio equipment.

Another standout feature is the CD-RW900CD's intuitive interface, which includes a large, backlit LCD screen that displays essential information such as track numbers, remaining recording time, and input levels. Users can easily navigate through various settings and options thanks to the straightforward controls, making the device accessible even for those who are new to audio recording.

For added convenience, the device supports various input options, including RCA connectors for analog sources and optical digital inputs for high-quality digital audio. Furthermore, the CD-RW900CD is equipped with a built-in stereo microphone input, allowing for straightforward audio capturing of live events or spontaneous recordings.

In terms of connectivity, the Teac CD-RW900CD offers RCA output for connection to external audio systems, enabling users to enjoy their recorded music through high-fidelity speakers. With its robust construction and sleek design, this CD recorder not only performs well functionally but also looks appealing in any studio or home audio setup.

In summary, the Teac CD-RW900CD combines advanced recording technology with user-friendly features, making it a standout choice for anyone looking to create high-quality audio recordings. Its versatility, sound fidelity, and ease of use make it a valuable addition to the toolkit of both amateur and professional musicians.
Top Page Image Contents