Teac CD-RW900CD owner manual Use of the remote control unit

Page 9

1 − Introduction

Never use a stabilizer or printable discs

Using commercially available CD stabilizers or printable recordable discs with this player will damage the mech- anism and cause it to malfunction.

NOTE

Never use a disc that has had a stabilizer mounted to it. The residual adhesive may cause the disc to stick to the turntable of the CD-RW900. If it sticks to the turntable, you will need a technician to get it out.

Beware of condensation

If the unit (or a compact disc) is moved from a cold to a warm place, or used after a sudden temperature change, there is a danger of condensation; vapor in the air could condense on the internal mechanism, making

Use of the remote control unit

correct operation impossible. To prevent this, or if this occurs, leave the player for one or two hours with the power turned on, then turn the power off and on again.

≠Do not expose the light-receptive spot to the direct sunlight or intense lights of an illumination for extend- ed periods. Long exposure to the lights may result a failure of the unit functions.

≠When the remote control will not be used over one month, please remove the batteries to prevent the possibility of battery acid leakage which could dam- age the unit. Should leakage occur, remove and discard the batteries, and wipe the battery case thor- oughly with a cloth. Avoid getting the battery liquid on the skin. After cleaning, replace with new batter- ies.

≠The remote control functions by using an infrared light signal. When using the unit to control the CD- RW900, other devices that are turned on could be operated by its signal.

≠If the range of remote operation becomes smaller, or commands do not always function properly, the bat- teries have become weak and should be replaced. Always replace both batteries with new batteries of the same type.

≠Point the remote control to the remote sensor on the main unit. Do not obstruct the path between the re- mote control and the remote sensor.

Batteries

If batteries are used improperly, or if leakage or break- age occurs, the unit will not function. Please observe the cautions indicated on the batteries and their pack- aging to ensure proper usage.

≠Confirm + and − polarity and follow the indications when inserting new batteries into the remote control.

≠Do not use old and new batteries together.

≠Even if the battery is the same size, the voltage may differ. Do not use batteries of different specifications together.

≠Do not attempt to recharge batteries that are non- rechargeable.

≠Do not open or disassemble batteries, throw them into a fire or put them in water.

Inserting batteries

1.Open the lid.

2.Confirm +/- polarity, and insert two AAA batteries.

3.Close the lid.

Connections

The following should be noted when you connect the unit to other equipment.

It is possible to connect the unit’s DIGITAL COAXIAL IN, DIGITAL OPTICAL IN and ANALOG UNBAL- ANCED INs (L, R) to other equipment at the same time. However, the unit can receive signals from only one digital input at a time.

Currently selected input jack is shown on the display.

Audio signals output from the unit are output from the analog ANALOG OUT jacks, as well as from the DIGI- TAL COAXIAL OUT jack and DIGITAL OPTICAL OUT connector simultaneously (but not from the digital out- puts in stop mode).

TASCAM CD-RW900 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents CD-RW900 Appliance to Rain or Moisture Important Safety PrecautionsImportant Safety Instructions Optical pickup Safety InformationContents − Introduction Supplied accessoriesAbout this manual Rack-mounting the unitRecordable discs About CD-R and CD-RW discsEnvironmental considerations Use of the remote control unit Front panel − Features of the CD-RW900Rear panel RC-RW900 Remote control unit Menu configuration − Menu operationOperation basics −Menu operation −Playback operations Using the skip functionDiscs for playback Simple playback operationsSelecting by track number Track searchNormal search Direct searchContinuous playback Playback modesSingle-track playback Program playbackTimer playback Time display switchingRepeat playback Random playbackTo B repeat playback Pitch control functionKey control function Directory playback setting Playing back MP3 filesAbout MP3 track data Input selection −RecordingInput monitoring Frequency conversionBasic recording Time display while recordingFull disc Fade-in and fade-out recording Advanced recordingSynchronaized recording Sync recordingAutomatic track division − Advanced Recording Rec mute functionManually divide track After recording FinalizingUnfinalizing CD-RW discs Refreshing a disc ErasingErasing tracks Erasing a whole discTitle input operation −TitlingDisc title input Track title inputTitle input by keyboard Keyboard type settingOther keyboard operations ／ œError messages Reference and specificationsMessages during operations TroublshootingSpecifications Dimensional drawing32 Ø CD-RW900

CD-RW900CD specifications

The Teac CD-RW900CD is a sophisticated piece of audio equipment designed for music enthusiasts and recording professionals alike. This versatile machine stands out in the crowded marketplace of CD recorders, primarily due to its combination of user-friendly features, high-quality sound reproduction, and durable build.

One of the key features of the CD-RW900CD is its ability to record on CD-R and CD-RW discs, providing flexibility for both permanent and rewritable media. This allows users to create custom compilations, record live performances, or archive audio collections with ease. The recorder is equipped with a high-precision CD transport mechanism, which ensures reliable playback and recording while minimizing jitter, a critical factor in maintaining sound quality.

The device boasts an impressive 24-bit/192 kHz audio resolution, enabling the capture of rich sound details during the recording process. This high-resolution capability makes it an ideal choice for audiophiles who demand clarity and fidelity in their music. Moreover, the built-in Analog to Digital Converter (ADC) enhances the quality of recordings from analog sources such as vinyl records, cassette tapes, and other audio equipment.

Another standout feature is the CD-RW900CD's intuitive interface, which includes a large, backlit LCD screen that displays essential information such as track numbers, remaining recording time, and input levels. Users can easily navigate through various settings and options thanks to the straightforward controls, making the device accessible even for those who are new to audio recording.

For added convenience, the device supports various input options, including RCA connectors for analog sources and optical digital inputs for high-quality digital audio. Furthermore, the CD-RW900CD is equipped with a built-in stereo microphone input, allowing for straightforward audio capturing of live events or spontaneous recordings.

In terms of connectivity, the Teac CD-RW900CD offers RCA output for connection to external audio systems, enabling users to enjoy their recorded music through high-fidelity speakers. With its robust construction and sleek design, this CD recorder not only performs well functionally but also looks appealing in any studio or home audio setup.

In summary, the Teac CD-RW900CD combines advanced recording technology with user-friendly features, making it a standout choice for anyone looking to create high-quality audio recordings. Its versatility, sound fidelity, and ease of use make it a valuable addition to the toolkit of both amateur and professional musicians.
Top Page Image Contents