![](/images/new-backgrounds/1032771/3277153x1.webp)
6-After recording
Erasing
Erasing tracks
This operation erases the specified track and all sub- sequent tracks from a recorded
1During stop, press the ERASE/DEL key on the front panel or the ERASE key on the remote control. Se- lect the ERASE TRACK? rotating the MULTI JOG dial or pressing the SKIP keys on the remote con- trol.
To cancel the operation at this point, press the ERASE/DELor the ERASE key again.
2Push the MULTI JOG dial or press the ENTER key to enter the function.
The display shows Erase
Rotate the MULTI JOG dial or press the SKIP key to change the track numbers you desire to erase.
To cancel the operation at this point, press the ERASE/DELor the ERASE key again.
3Push the MULTI JOG dial or press the ENTER key to operate the function.
The display shows Sure?
To cancel the operation at this point, press the STOP key.
4Push the MULTI JOG dial or press the ENTER key again to proceed the operation.
The display shows the Erase flashing and the re- maining time. The unit starts counting down from a time shown on the display.
NOTE
Once the operation is proceeded, the STOP key cannot function. Please confirm before the operation.
5When the tracks have been erased, Complete will appears on the display.
Erasing a whole disc
When you want to erase a whole disc (all the tracks on a disc), follow the procedure below:
1During stop, press the ERASE/DEL key on the front panel or the ERASE key on the remote control. Se- lect the ERASE DISC? rotating the MULTI JOG dial or pressing the SKIP keys on the remote control.
To cancel the operation at this point, press the ERASE/DEL or the ERASE key again.
2Push the MULTI JOG dial or press the ENTER key to enter the function.
The display shows Sure?.
To cancel the operation at this point, press the STOP key.
3Push the MULTI JOG dial or press the ENTER key again to proceed the operation.
The display shows the Erase flashing and the re- maining time. The unit starts counting down from a time shown on the display.
NOTE
Once the operation is proceeded, the STOP key cannot function. Please confirm before the operation.
4When the disc has been erased, Complete appears then Blank Disc will appear on the display.
Refreshing a disc
Refreshing the disc makes a disc usable again. This op- eration destroys all data on the disc.
1 Load the disc, and the unit in stop mode, press the ERASE/DEL key on the front panel or the ERASE key on the remote control. Select the REFRESH? rotating the MULTI JOG dial or pressing the SKIP keys on the remote control.
To cancel the operation at this point, press the ERASE/DEL or the ERASE key again.
2Push the MULTI JOG dial or press the ENTER key on the remote control to enter the function.
The display shows Sure?
To cancel the operation at this point, press the STOP key.
3Push the MULTI JOG dial or press the ENTER key again to proceed the operation.
The display shows the Erase flashing and the re- maining time. The unit starts counting down from a time shown on the display.
4When the disc has been refreshed, Complete will appear on the display, and Blank disc shows up.
TASCAM