Teac CD-RW900CD owner manual About CD-R and CD-RW discs, Recordable discs

Page 7

About CD-R and CD-RW discs

CD-R discs can be recorded once only. Once they have been used for recording, they cannot be erased or re- recorded. However, if space is available on the disc, additional material can be recorded. The pack-aging of CD-R discs will include one of the following logos:

By contrast, a CD-RW disc can be used in much the same way as a CD-R disc, but the last track or tracks recorded can be erased before the disc has been “finalized”, and the space on the disc can be re- used for other recordings. The packaging of CD-RW discs will include the logo one of the following logos:

High Speed

However, you should note that an audio CD created using a CD-RW900 disc may not play back satisfactorily on every audio CD player. It will, naturally, be playable on the CD-RW900. This is in no way a limitation of the CD-RW900 itself, but of the difference between the different types of media and the methods used to read them.

There are precautions that you should take when handling CD-R and CD-RW discs.

≠Avoid touching the recording (non-label) side of a disc on which you will be recording. Recording on a disc requires a cleaner surface than playing back, and fingerprints, grease, etc. can cause errors in the recording process.

Finalizing

Although audio data may be written on a CD-R or CD- RW disc, a standard CD player will not be able to read the data (i.e. play back the audio) until a final *TOC has been written at the start of the disc.

*TOC=Table of contents:

information of recorded data, which contains titles, starting and ending addresses, and etc..

The process of writing this table of contents is known as “finalizing”. Once this has been done, no further data can be written to the disc. See “Finalizing” on page 25 for details.

“Recordable” discs

In this maanual, we use the term “recordable” disc to describe a CD-R or CD-RW disc that has not been finalized, i.e. further recording is possible on the disc.

1 − Introduction

≠CD-R and CD-RW discs are sensitive to the effects of heat and ultraviolet rays. It is important that they are not stored in a location where direct sunlight will fall on them, and which is away from sources of heat such as radiators or heat-generating electrical devices.

≠Always store CD-R and CD-RW discs in their cases to avoid dirt and dust accumulating on their surfaces.

≠When labeling CD-R and CD-RW discs, always use a soft oil-based felt-tipped pen to write the information. Never use a ball-point or hard-tipped pen, as this may cause damage to the recorded side.

≠Always keep the recording sides of the discs away from grime and dust to avoid a reduction in sound quality. To clean a disc, wipe gently with a soft dry cloth from the center towards the outside edge. Do not use thinner, gasoline, benzene or LP cleaning fluid, as these will damage the disc and cause the disc unplayable.

≠Do not put labels or protective sheets on the discs and do not use any protective coating spray.

≠If you are in any doubt as to the care and handling of a CD-R disc, read the precautions supplied with the disc, or contact the disc manufacturer directly.

In the case of a CD-RW disc which has been finalized, the whole of the disc may be erased, or the disc may be “refreshed”, and the disc re-used.

In addition, a CD-RW disc that has been finalized may be “unfinalized”, i.e. only the TOC is removed. This allows further tracks to be recorded to the disc, provided that there is space on the disc.

TASCAM CD-RW900 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents CD-RW900 Appliance to Rain or Moisture Important Safety PrecautionsImportant Safety Instructions Optical pickup Safety InformationContents Rack-mounting the unit Supplied accessories− Introduction About this manualRecordable discs About CD-R and CD-RW discsEnvironmental considerations Use of the remote control unit Front panel − Features of the CD-RW900Rear panel RC-RW900 Remote control unit − Menu operation Menu configurationOperation basics −Menu operation Simple playback operations Using the skip function−Playback operations Discs for playbackDirect search Track searchSelecting by track number Normal searchProgram playback Playback modesContinuous playback Single-track playbackRandom playback Time display switchingTimer playback Repeat playbackPitch control function To B repeat playbackKey control function Playing back MP3 files Directory playback settingAbout MP3 track data Frequency conversion −RecordingInput selection Input monitoringTime display while recording Basic recordingFull disc Sync recording Advanced recordingFade-in and fade-out recording Synchronaized recordingAutomatic track division Rec mute function − Advanced RecordingManually divide track Finalizing After recordingUnfinalizing CD-RW discs Erasing a whole disc ErasingRefreshing a disc Erasing tracksTrack title input −TitlingTitle input operation Disc title input／ œ Keyboard type settingTitle input by keyboard Other keyboard operationsTroublshooting Reference and specificationsError messages Messages during operationsDimensional drawing Specifications32 Ø CD-RW900

CD-RW900CD specifications

The Teac CD-RW900CD is a sophisticated piece of audio equipment designed for music enthusiasts and recording professionals alike. This versatile machine stands out in the crowded marketplace of CD recorders, primarily due to its combination of user-friendly features, high-quality sound reproduction, and durable build.

One of the key features of the CD-RW900CD is its ability to record on CD-R and CD-RW discs, providing flexibility for both permanent and rewritable media. This allows users to create custom compilations, record live performances, or archive audio collections with ease. The recorder is equipped with a high-precision CD transport mechanism, which ensures reliable playback and recording while minimizing jitter, a critical factor in maintaining sound quality.

The device boasts an impressive 24-bit/192 kHz audio resolution, enabling the capture of rich sound details during the recording process. This high-resolution capability makes it an ideal choice for audiophiles who demand clarity and fidelity in their music. Moreover, the built-in Analog to Digital Converter (ADC) enhances the quality of recordings from analog sources such as vinyl records, cassette tapes, and other audio equipment.

Another standout feature is the CD-RW900CD's intuitive interface, which includes a large, backlit LCD screen that displays essential information such as track numbers, remaining recording time, and input levels. Users can easily navigate through various settings and options thanks to the straightforward controls, making the device accessible even for those who are new to audio recording.

For added convenience, the device supports various input options, including RCA connectors for analog sources and optical digital inputs for high-quality digital audio. Furthermore, the CD-RW900CD is equipped with a built-in stereo microphone input, allowing for straightforward audio capturing of live events or spontaneous recordings.

In terms of connectivity, the Teac CD-RW900CD offers RCA output for connection to external audio systems, enabling users to enjoy their recorded music through high-fidelity speakers. With its robust construction and sleek design, this CD recorder not only performs well functionally but also looks appealing in any studio or home audio setup.

In summary, the Teac CD-RW900CD combines advanced recording technology with user-friendly features, making it a standout choice for anyone looking to create high-quality audio recordings. Its versatility, sound fidelity, and ease of use make it a valuable addition to the toolkit of both amateur and professional musicians.
Top Page Image Contents