Teac CD-RW900CD owner manual Automatic track division

Page 24

5−Recording

When audio signal is not detected more than five sec- onds, the CD-RW900 automatically will stop recording and enters record standby mode.

level

REC ready

Five seconds

S_LVL

time

NOTE

In the Sync 1 mode, if the unit detects the signal which is under the adjusted level over five secondsd, the Sync recording mode will be canceled.

3To cancel the Sync recording mode, press the SYNC REC key and select the Sync OFF. Record- ing returns to normal and continues till you press the STOP key or the source signal stops.

Pressing the STOP key stops recording. Once stopped, the selected mode will be canceled.

NOTE

≠When the Sync 1 is on, and the READY key is pressed, Sync recording stops and the setting will be canceled.

≠When the Sync ALL is on, and the READY key is pressed, the unit enters recording standby mode with remaining the Sync recording setting.

≠If you set the value only high-level signals trigger re- cording, remember that this will not record the start of a piece:

level

Recordsing starts

 

T h i s p a r t o f

 

the track is not

S_LVL

recorded

 

time

≠Also remember that when recording from an analog source, the threshold should be set so that it is high- er than the “noise floor”. If the “noise floor” is higher than the threshold, a false start will occur:

level

Start of track is not registered

S_LVL

Noise is higher than threshold

time

Automatic track division

The trigger level can also be used to divide tracks if the A_TRACK (auto track) function is enabled.

When this function is enabled, the unit automatically in- serts a track division in the recorded material.

To enable or disable automatic track division:

1Use A_TRK option in the REC sub-menu to set the mode on. The A.TRACK indicator at the top right of the display lights.

2Rotate and push the MULTI JOG dial to select and enter the modes following:

≠Level

≠DD (digital direct)

When recording digitally from MD, CD or DAT, this mode detects a track boundary and divides the track.

However, when the DD mode is on, and if the analog source or non-DAT/CD/MD digital connections are detected, the track number will be increased by the setting level that you set in the Level mode.

When the sound level has dropped below the threshold for more than two seconds, and sound has re-started, the track will be divided.

Use A_TRK LEVEL option in the REC sub-menu. The trigger level is set to -24dB to -72 dB.

 

At least

 

level

2 seconds

Track increment

 

 

A_LVL

time

24 TASCAM CD-RW900

Page 23 Page 25
Image 24
Page 23 Page 25
Contents CD-RW900 Important Safety Precautions Appliance to Rain or MoistureImportant Safety Instructions Safety Information Optical pickupContents Supplied accessories − IntroductionAbout this manual Rack-mounting the unitAbout CD-R and CD-RW discs Recordable discsEnvironmental considerations Use of the remote control unit − Features of the CD-RW900 Front panelRear panel RC-RW900 Remote control unit Menu configuration − Menu operationOperation basics −Menu operation Using the skip function −Playback operationsDiscs for playback Simple playback operationsTrack search Selecting by track numberNormal search Direct searchPlayback modes Continuous playbackSingle-track playback Program playbackTime display switching Timer playbackRepeat playback Random playbackTo B repeat playback Pitch control functionKey control function Directory playback setting Playing back MP3 filesAbout MP3 track data −Recording Input selectionInput monitoring Frequency conversionBasic recording Time display while recordingFull disc Advanced recording Fade-in and fade-out recordingSynchronaized recording Sync recordingAutomatic track division − Advanced Recording Rec mute functionManually divide track After recording FinalizingUnfinalizing CD-RW discs Erasing Refreshing a discErasing tracks Erasing a whole disc−Titling Title input operationDisc title input Track title inputKeyboard type setting Title input by keyboardOther keyboard operations ／ œReference and specifications Error messagesMessages during operations TroublshootingSpecifications Dimensional drawing32 Ø CD-RW900

CD-RW900CD specifications

The Teac CD-RW900CD is a sophisticated piece of audio equipment designed for music enthusiasts and recording professionals alike. This versatile machine stands out in the crowded marketplace of CD recorders, primarily due to its combination of user-friendly features, high-quality sound reproduction, and durable build.

One of the key features of the CD-RW900CD is its ability to record on CD-R and CD-RW discs, providing flexibility for both permanent and rewritable media. This allows users to create custom compilations, record live performances, or archive audio collections with ease. The recorder is equipped with a high-precision CD transport mechanism, which ensures reliable playback and recording while minimizing jitter, a critical factor in maintaining sound quality.

The device boasts an impressive 24-bit/192 kHz audio resolution, enabling the capture of rich sound details during the recording process. This high-resolution capability makes it an ideal choice for audiophiles who demand clarity and fidelity in their music. Moreover, the built-in Analog to Digital Converter (ADC) enhances the quality of recordings from analog sources such as vinyl records, cassette tapes, and other audio equipment.

Another standout feature is the CD-RW900CD's intuitive interface, which includes a large, backlit LCD screen that displays essential information such as track numbers, remaining recording time, and input levels. Users can easily navigate through various settings and options thanks to the straightforward controls, making the device accessible even for those who are new to audio recording.

For added convenience, the device supports various input options, including RCA connectors for analog sources and optical digital inputs for high-quality digital audio. Furthermore, the CD-RW900CD is equipped with a built-in stereo microphone input, allowing for straightforward audio capturing of live events or spontaneous recordings.

In terms of connectivity, the Teac CD-RW900CD offers RCA output for connection to external audio systems, enabling users to enjoy their recorded music through high-fidelity speakers. With its robust construction and sleek design, this CD recorder not only performs well functionally but also looks appealing in any studio or home audio setup.

In summary, the Teac CD-RW900CD combines advanced recording technology with user-friendly features, making it a standout choice for anyone looking to create high-quality audio recordings. Its versatility, sound fidelity, and ease of use make it a valuable addition to the toolkit of both amateur and professional musicians.
Top Page Image Contents