Cisco Systems 565, 510 installation instructions Specification Description

Operating Specifications

Table 1 Content Engine 510 and 565 Operating Specifications (continued)

Specification	Description
Electrical input	•	Sine-wave input (47–63 Hz) required
	• Input voltage low range:
		–	Minimum: 100 VAC
		–	Maximum: 127 VAC
	• Input voltage high range:
		–	Minimum: 200 VAC
		–	Maximum: 240 VAC
	• Input kilovolt-amperes (kVA), approximately:
		–	Minimum: 0.087 kVA
		–	Maximum: 0.150 kVA
Ports	•	10BASE-T, 100BASE-TX, 1000BASE-TX (dual) Ethernet ports
	•	Serial port
	•	2 USB1 ports
	• Ultra160 SCSI port (CE-565 only)
	• Fibre Channel port (on optional card)
	• MPEG A/V decoder port (on optional card):
		– 3 BNC2 connectors for YUV, RGB3, and composite video output
		– Mini-XLR 8-pin connector for S/PDIF4 and analog stereo audio
			output
		– Mini-XLR 8-pin connector for VGA5 output
Temperature	•	Content Engine on: 50 to 95°F (10 to 35°C)
	• Content Engine off: –40 to 140°F (–40 to +60°C)
Humidity	•	Content Engine on: 8 to 80%
	• Content Engine off: 8 to 80%
Altitude	Maximum altitude: 6500 ft (2000 m)
Acoustical noise	•	Sound power, idling: 6.5 bel maximum
emissions	•	Sound power, operating: 6.5 bel maximum

1.USB = Universal Serial Bus

2.BNC = Bayonet-Neill-Concelman

3.RGB = red green blue

4.S/PDIF = Sony/Phillips Digital Interface

5.VGA = video graphics array

Installing the Cisco Content Engine 510 and 565

78-14731-02 13