Cisco Systems Installing a Content Engine 510 or 565 Unit, Cage nuts Clip nuts

Page 14

Installing a Content Engine 510 or 565 Unit

Installing a Content Engine 510 or 565 Unit

Place the unit in the desired location. You can mount it in a rack for your convenience, or place it on a solid, stable surface. If you do not plan to install the Content Engine in an equipment rack, proceed to the “Installing the Chassis on a Tabletop” section on page 18.

Racks are marked in vertical increments of 1.75 inches (4.44 cm). Each increment is referred to as a rack unit (RU). A 1-RU device is 1.75 inches (4.44 cm) tall.

Warning To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure that the system remains stable. The following guidelines are provided to ensure your safety:

•This unit should be mounted at the bottom of the rack if it is the only unit in the rack.

•When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component at the bottom of the rack.

•If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack.

To install the Content Engine in the rack, follow these steps:

Step 1 Select a 1-RU-size location in the rack. Starting with the right front side of the rack (as viewed from the front of the Content Engine), install a clip nut or cage nut in the top and bottom positions of the 1-RU location that you selected (see Figure 6) and then install a clip nut or cage nut in the corresponding positions on the rear of the rack.

Repeat this step for the left front side of the rack and the corresponding location on the rear of the rack.

Figure 6 Installing Clip Nuts or Cage Nuts

1

2

83200

1

Cage nuts

2

Clip nuts

Installing the Cisco Content Engine 510 and 565

14

78-14731-02

 

 

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Documentation Survey IntroductionContents If You Need More InformationBewaar Deze Instructies Aviso Instruções Importantes DE Segurança Warnung Wichtige SicherheitshinweiseAvvertenza Importanti Istruzioni Sulla Sicurezza Guarde Estas Instrucciones Installing the Cisco Content Engine 510 78-14731-02 Description Model Product NumberContent Engine 510 and 565 Back Panel Installation Prerequisites Tools and Parts RequiredSafety Guidelines General Precautions Protecting Against Electrostatic Discharge Operating SpecificationsSpecification Description Rack-Mounting ConsiderationsSpecification Description Installing a Content Engine 510 or 565 Unit Cage nuts Clip nutsSlide rail assembly Release latch Inner slide rail Attaching the Inner Slide Rail to the Content Engine Attaching the Slide Rails to the Rack Installing the Chassis on a Tabletop Inserting the Inner Slide RailsConnecting Cables Connecting Power and Booting the SystemIndicator Color State Description Checking the LEDsIndicator Color State Back Panel LEDsState Meaning Accessing the Acns Software on the Content EngineConnecting a PC to the Content Engine Removing or Replacing a Content Engine Replacement, Repair, or Refund Policy for Hardware Cisco One-Year Limited Hardware Warranty TermsDuration of Hardware Warranty Cisco.com To Receive a Return Materials Authorization RMA NumberObtaining Documentation Documentation CD-ROMDocumentation Feedback Obtaining Technical AssistanceOrdering Documentation Cisco TAC WebsiteTAC Case Priority Definitions Obtaining Additional Publications and InformationOpening a TAC Case Obtaining Additional Publications and Information
Top Page Image Contents