Cisco Systems 3515 MCU12, 3515 MCU24 manual Verifying the Package Contents

Chapter 2 Setting Up Your Cisco Unified Videoconferencing 3515 MCU

Verifying the Package Contents

Figure 2-1 Cisco Unified Videoconferencing 3515 MCU Front Panel

	SERIAL	GK Reg CPU Hight
10/100 Base T	RST	ALARM ACT
	SERIAL	MC CPU Hight
		PWR
10/100 Base T	RST	ALARM ACT

Table 2-1 Front Panel Components

157265

Component	Description
10/100 BaseT connector	An RJ-45 connector that provides the primary Ethernet connection
	for the IP network port.
Serial connector	A DB-9 connector that allows you to connect a PC terminal for local
	configuration.
RST button	Allows you to reset the Cisco Unified
	Videoconferencing 3515 MCU unit manually.
GK Reg and MC LEDs	Lights green when the Cisco Unified
	Videoconferencing 3515 MCU is registered with a gatekeeper, or
	when there is no gatekeeper registered and the auto attendant feature
	is enabled.
CPU High LED	Lights green when more than 50% of the Cisco Unified
	Videoconferencing 3515 MCU unit resources are in use.
ACT LED	Lights green to indicate that there is at least one currently active
	conference on the Cisco Unified Videoconferencing 3515 MCU
	unit.
ALARM LED	Lights green to indicate that an error has occurred and the
	Cisco Unified Videoconferencing 3515 MCU unit requires
	resetting.
10/100 BaseT LEDs	The top part of the 10/100 BaseT connector contains two LED
	indicators. The left-hand LED lights green when the local IP
	network link is active. The right-hand LED lights green if the
	connection speed is 100 Mbps, and is off when the connection speed
	is 10 Mbps.

Verifying the Package Contents

Procedure

Step 1 Inspect the contents of the box for shipping damage.

Step 2 Report any damage or missing items to your Cisco representative.

Step 3 Verify the package contents for the Cisco Unified Videoconferencing 3515 MCU unit. See Table 2-2.

Installation and Upgrade Guide for Cisco Unified Videoconferencing 3515 MCU Release 5.6

2-2 OL-17012-01