
U s e r I n s t a l l a b l e F e a t u r e s
Figure 4-11. Removing a Memory Upgrade Module
4.Store the memory upgrade module in a static guarded sleeve.
5.Replace the cover and reinstall the screw.
CHECKING THE MEMORY CAPACITY
Once you have changed the system memory capacity by replacing the installed module with a larger one, be sure to check that your notebook has recognized the change.
Check the memory capacity by clicking [Start]
Control Panel
The amount of memory is displayed next to “Memory -
RAM”.
There may be a variation between the actual memory size and what is displayed. This is due to the fact that your system uses a video graphics chip which dynami- cally allocates system memory to accelerate graphics performance. Up to 224 MB of memory is dynamically shared on an
If the total memory displayed is incorrect, check that your memory upgrade module is properly installed. (If the module is prop- erly installed and the capacity is still not correctly recognized, see Troubleshooting on page 45.)
39