Fujitsu Siemens Computers 4612 FA manual Power cable, For the United Kingdom

Page 13

Color monitor 4612 FA

We, Siemens Information and Communication Products LLC, hereby declare that the equipment bearing the trade name and model number specified above was tested confirming to the applicable FCC Rules under the most accurate measurement standards possible, and that all the necessary steps have been taken and are in force to assure that production units of the same equipment will continue to comply with the Commissions requirements.

Power cable

To guarantee safe operation, use the cable supplied. Use the following guidelines if it is necessary to replace the original cable set.

The female/male receptacles of the cord set must meet CEE-22 requirements.

The cable has to be HAR-certified or VDE-certified. The mark HAR or VDE will appear on the outer sheath or on the insulation of one of the inner conductors.

For devices which are mounted on a desk or table, type SVT or SJT cable sets may be used. For devices which sit on the floor, only SJT type cable sets may be used.

The cable set must be selected according to the rated current for your device.

Power cable for devices distributed in the US and Canada

In the United States and Canada the cord set must also be UL-listed and CSA-labelled. The voltage rating should be min. 250 volts a.c.

Please consult the following table for the selection criteria for power cables used in the United States and Canada.

Cable type

Size of conductors in cable

Maximum current rating of the device

 

 

 

SJT

18 AWG

10 Amps

 

16 AWG

12 Amps

 

14 AWG

12 Amps

 

 

 

SVT

18 AWG

10 Amps

 

17 AWG

12 Amps

 

 

 

For the United Kingdom

Should the plug on the flexible cord not be of the type for your socket outlets, do not use an adapter but remove the plug from the cord and discard. Carefully prepare the end of the supply cord and fit a suitable plug.

WARNING

THIS APPLIANCE MUST BE EARTHED

IMPORTANT

The wires in this mains lead are coloured in accordance with the following code:

Green and Yellow:

Earth

Blue:Neutral

Brown:Live

A26361-K628-Z100-1-5E19

English - 5

Image 13
Contents 4612 FA Sie haben Page A26361-K628-Z100-1-5E19 Betriebsanleitung Operating Manual Page Contents Page Target group IntroductionFurther information Important notes SafetyNotational conventions Transport CleaningDeclaration of Conformity FCC Class B Compliance StatementPower cable for devices distributed in the US and Canada Power cableFor the United Kingdom CE certificate Energy Star GuidelinesDisposal and recycling Checking the contents of the consignment Connecting the monitor Installing an ergonomic video workstationConnecting cables to the monitor Adjusting height, rake and rotation Connecting cables to the computerAdjusting portrait format Operation of the monitorSwitching the monitor on/off Stage Energy-saving mode Changing the monitor settingsBasic monitor settings with the floppy disk supplied Exit Control Select Reset DVI / D-SUB Monitor settings using the OSD menuMaking automatic picture adjustments Auto Adjust Position Left / Right Down / UP Auto AdjustMaking manual picture adjustments Image Adjust Adjusting picture position Position Option FunctionSetting color temperature and color ratio Color Control Setting the picture quality SmoothingSetting automatic video signal detection video detect Switching full-screen mode on or off Expansion ModeSelecting signals for DVI connection DVI select Setting the language for the OSD menu Language SelectDisplaying note on resolution Resolution Notifier Activating the factory settings Factory PresetDisplaying graphics mode Display Mode Shifting the OSD menu up, down, to the left or to the rightRemoving the monitor base Dimensions and weight LCD monitor Technical dataAccessories Storable display modes Electrical dataVESA-DDC-compatible VGA interface Preset operating modesEnvironmental conditions Pin Meaning Pin assignment D-SUBNo display power indicator does not light Error handlingMonitor port DVI Display is too small or not centeredPermanently unlit or lit pixels No display power indicator lightsScreen becomes darker Image of last screen display still visible