Color monitor 4612 FA
Installing an ergonomic video workstation
Before you set up your equipment you should select a suitable position for working at the monitor. Please observe the following advices when installing a video workstation.
Window
Avoid direct and reflected glare.
Avoid glare from electric lighting.
edge of desk |
|
permissible | permissible |
reaching sector | reaching sector |
600 mm | 600 mm |
Position the keyboard where it is easiest to reach.
preferable viewing sector
0° | 65° |
30°
60°30°
permissible | 65° | |
viewing sector | ||
|
permissible viewing sector
approx. 90°
approx. 90° and more
Position the monitor for | Keep ventilated areas clear. | Remember to maintain correct |
optimum viewing. The viewing |
| posture. |
distance to the monitor should |
|
|
be approximately 50 cm. |
|
|
Depending on the situation, the use of a swivel arm or wall bracket (VESA FPMPMI), which are included in the accessories, may be advisable. For this purpose the monitor base must be removed beforehand as described in chapter "Removing the monitor base".
Connecting the monitor
! | Please note the information provided in the "Safety" section in the chapter "Important | |
notes" at the beginning of this manual. | ||
|
CE conformance and optimum picture quality are guaranteed only if you use the data cable supplied.
Do not cover the ventilation openings of the monitor.
The computer power plug must be pulled!
Ê Be sure that the monitor and the computer are switched off.
8 - English |