Color monitor 4612 FA
Setting position for the OSD menu (OSD Position)
Option | Function |
|
|
Up, Down, Left, | Shifting the OSD menu up, down, to the left or to the right |
Right |
|
|
|
Setting display time for the OSD menu (OSD Turn Off Time)
You can select between 10, 20, 30, 60 and 120 seconds. If the adjusted time has run out without the settings being saved, the OSD menu is automatically closed.
Locking the OSD menu (OSD Lock Out)
The OSD menu can be locked to prevent accidental or unauthorized changes to the monitor settings.
ÊPress and hold down the SELECT button in the OSD Lock Out setting window and briefly press the ▲ button of the control panel.
To release the locked OSD menu again, you must carry out the same step.
Activating the factory settings (Factory Preset)
Factory settings are available for picture definition, picture position, picture size and colors in the preset operating modes (see table in the chapter "Technical data".
You can choose whether you want to reset the values for the input
ÊSelect Factory Preset and press the RESET button to reset the selected settings to the factory settings.
i | If you only wish to activate the factory settings for one menu item, mark the corresponding |
menu item, press the RESET button and then the SELECT button. |
Displaying note on resolution (Resolution Notifier)
The optimum resolution for this monitor is 1280 x 1024. With the function activated (ON), a message appears on the screen after approx. 30 seconds if a different resolution has been selected.
Displaying graphics mode (Display Mode)
Under Display Mode you find information on the display mode currently set.
Displaying monitor data (Monitor Information)
You will find the model designation and the serial number of the monitor under Monitor Information .
English - 17 |