Fujitsu Siemens Computers 4612 FA manual Connecting cables to the monitor

Page 17

Color monitor 4612 FA

Connecting cables to the monitor

The monitor ports are protected by a cover.

 

 

 

2

 

 

1

3

 

 

 

 

 

 

4

1 =

Cover lever

3 =

DVI connector

2 =

D-SUB connector

4 =

Power connector

ÊPress the cover lever (1) to the left and remove the cover.

The data cables provided have a plug for the DVI connection socket on the monitor and a 15-pin D- SUB plug or a DVI plug for the connection on the computer.

ÊSelect the suitable data cable for your computer.

Digital graphics card with DVI interface:

DVI connector

Graphics card with VGA interface:

D-SUB connector

Information on the computer connections and interfaces is contained in the operating manual for your computer.

ÊConnect the DVI connector of the data cable to the DVI connector on the monitor (3) and secure the plug-in connection by tightening the safety screws.

If instead of the data cables supplied you want to use a data cable with two 15-pin D-SUB i connectors or if you want to connect the monitor to a second computer, proceed as

follows:

ÊConnect the D-SUB connector of the data cable to the appropriate D-SUB connector

(2) and secure the plug-in connection by tightening the safety screws.

Data cables with two 15-pin D-SUB connectors are available from specialized dealers.

After you have switched on the monitor you must select the desired input using the DVI/D- SUB button. A message to this effect appears on screen.

ÊConnect the connector of the power cable to the power connector (4) of the monitor and ensure a secure connection.

ÊMount the cover over the connections again.

A26361-K628-Z100-1-5E19

English - 9

Image 17
Contents 4612 FA Sie haben Page A26361-K628-Z100-1-5E19 Betriebsanleitung Operating Manual Page Contents Page Further information IntroductionTarget group Notational conventions SafetyImportant notes Transport CleaningDeclaration of Conformity FCC Class B Compliance StatementFor the United Kingdom Power cablePower cable for devices distributed in the US and Canada Disposal and recycling Energy Star GuidelinesCE certificate Checking the contents of the consignment Connecting the monitor Installing an ergonomic video workstationConnecting cables to the monitor Adjusting height, rake and rotation Connecting cables to the computerAdjusting portrait format Operation of the monitorSwitching the monitor on/off Basic monitor settings with the floppy disk supplied Changing the monitor settingsStage Energy-saving mode Exit Control Select Reset DVI / D-SUB Monitor settings using the OSD menuMaking automatic picture adjustments Auto Adjust Position Left / Right Down / UP Auto AdjustMaking manual picture adjustments Image Adjust Adjusting picture position Position Option FunctionSetting color temperature and color ratio Color Control Setting the picture quality SmoothingSetting automatic video signal detection video detect Switching full-screen mode on or off Expansion ModeSelecting signals for DVI connection DVI select Setting the language for the OSD menu Language SelectDisplaying note on resolution Resolution Notifier Activating the factory settings Factory PresetDisplaying graphics mode Display Mode Shifting the OSD menu up, down, to the left or to the rightRemoving the monitor base Dimensions and weight LCD monitor Technical dataAccessories Storable display modes Electrical dataEnvironmental conditions Preset operating modesVESA-DDC-compatible VGA interface Pin Meaning Pin assignment D-SUBNo display power indicator does not light Error handlingMonitor port DVI Display is too small or not centeredPermanently unlit or lit pixels No display power indicator lightsScreen becomes darker Image of last screen display still visible