Monitor and Maintain the SRB Network
Report Spurious Frame-Copied Errors
An IBM 3174 cluster controller can be configured to report
Monitor and Maintain the SRB Network
You can display a variety of information about the SRB network. To display the information you require, use one or more of the following commands in EXEC mode:
Command | Purpose |
show | Display the defined input and output |
| access list expressions. |
|
|
show controllers token | Display internal state information |
| about the Token Ring interfaces in |
| the system. |
|
|
show interfaces token | Provide |
| particular interface. |
|
|
show interfaces | Provide |
| state of source bridging for a |
| particular interface. |
|
|
show lnm bridge | Display all currently configured |
| bridges and all parameters that are |
| related to the bridge as a whole and |
| not to one of its interfaces. |
|
|
show lnm config | Display the logical (multiport bridge) |
| configuration of the Cisco IOS |
| software. |
|
|
show lnm interface [type number] | Display all |
| information about a specific |
| interface. |
|
|
show lnm ring | Display all |
| information about a specific ring |
| number. |
|
|
show lnm station [address] | Display all |
| information about a specific station |
| or about all known stations on the |
| ring. |
|
|
show | Show the current state of any current |
| local acknowledgment for both LLC2 |
| and SDLLC connections. |
|
|
show | Display the contents of the NetBIOS |
| cache. |
|
|
show rif | Display the contents of the RIF |
| cache. |
|
|
show | Display the current source bridge |
| configuration and miscellaneous |
| statistics. |
|
|