Cisco Systems BC-109 manual Autonomous Switching Example

SRB Configuration Examples

Autonomous Switching Example

The following example enables use of autonomous switching between two ciscoBus Token Ring interfaces in the same router. Frames entering Token Ring interfaces 0 or 1 will be autonomously switched to the other interface.

!global command to apply interface configuration commands to the ring group source-bridge ring-group 2

!commands that follow apply to interface token 0

interface tokenring 0

!enable srb between local ring 1, bridge 1, and target ring 2 source-bridge 1 1 2

!enable autonomous switching for interface token 0

source-bridge route-cache cbus

!

interface tokenring 1

!enable srb between local ring 2, bridge 1, and target ring 1 source-bridge 2 1 1

source-bridge route-cache cbus

BC-164Bridging and IBM Networking Configuration Guide