Cisco Systems 8540 CSR, 8510 CSR appendix Router# show controller pos 2/0/0 detail

Chapter 4 Configuring Interfaces

Configuring the POS OC-12c Uplink Interface (Catalyst 8540)

The following example shows output for the show controllers pos command with the detail option:

Router# show controller pos 2/0/0 detail

Interface POS2/0/0

Hardware is Packet Over SONET, One-port OC12, Single Mode Intermediate Reach

POS2/0/0
SECTION
LOF =	1	LOS = 0		BIP(B1) = 96
LINE
AIS =	0	RDI = 1	FEBE = 265	BIP(B2) = 1170
PATH
AIS =	0	RDI = 1	FEBE = 78	BIP(B3) = 51
LOP =	1
PLM-P	= 1	UNEQ-P = 0

Active Alarms: None

Active Defects:None

Alarm reporting enabled for:SF SLOS SLOF B1-TCA B2-TCA PLOP B3-TCA

Framing:SONET
APS
COAPS = 25					PSBF = 1
State:PSBF_state = False
Rx(K1/K2):00/00					Tx(K1/K2):00/00
S1S0 = 00, C2 = 0x16
PATH TRACE BUFFER:STABLE
Remote hostname :acl-traffic
Remote interface:POS9/0/0
Remote IP addr				:0.0.0.0
Remote Rx(K1/K2):00/00							Tx(K1/K2):00/00
61	63	6C 2D	74	72	61	66	66	69	63 00	00	00	00 00	acl-traffic
00	00	2F 30	00	00	00	00	50	4F	53 39	2F	30	2F 30	../0....POS9/0/0
00	00	00 00	00	00	30	2E	30	2E	30 2E	30	00	00 00	......0.0.0.0...
00	00	00 00	00	00	30	30	30	30	30 30	30	30	0D 0A	......00000000..
BER thresholds: SF = 10e-3							SD =		10e-6
TCA thresholds: B1 = 10e-6							B2 =		10e-6	B3 = 10e-6
Clock source: Configured:line									Current:line

Last valid pointer from H1-H2: 0x20A

B1:set 564, clr 124, ber 0, err 0, lk<1eps 0/0, lk_eps 95, dly 0, set 1, clr 10

, A 0, Rd 0, R 1, D 1

B2:set 564, clr 124, ber 0, err 0, lk<1eps 0/0, lk_eps 0, dly 0, set 1, clr 10,

A 0, Rd 0, R 1, D 1

B3:set 564, clr 124, ber 0, err 0, lk<1eps 0/0, lk_eps 50, dly 0, set 1, clr 10

, A 0, Rd 0, R 1, D 1

Total number of port interrupts = 33

----- POS module IO registers -----

Starting address @0xBC280000

FPGA Revision	= 0x0001
Reset Register	= 0x0003
Tx/Rx LED Register	= 0x0000
Alarm LED Register	= 0x0000
CD LED Register	= 0x0000
PLL Control Register	= 0x0003
Tx Clock Config Register	= 0x0000
	Layer 3 Switching Software Feature and Configuration Guide
78-6235-04, Cisco IOS Release 12.0(10)W5(18)		4-25