Cisco Systems 7200 VXR Total, Dram Bank Quantity, MEM-NPE-32MB=, MEM-NPE-64MB=, MEM-NPE-128MB=

Chapter 1 Cisco 7200 VXR Product Overview

Field-Replaceable Units

Table 1-14	NPE-200 Memory Specifications (continued)
Memory Type		Size		Quantity		Description	Location1
Primary cache		—	—		R5000 processor,		U44
						internal cache
Secondary cache		512 KB		4		R5000 processor,	U16, U9, U109,
						unified external	and U107
						cache

1.Location on processing engine board. See Figure 1-11.

2.ROM = read-only memory

Note To prevent DRAM errors in the NPE-100, NPE-150, or NPE-200, and to ensure that your system initializes correctly at startup, DRAM bank 0 (socket U18 and U25, or U11 and U25) must contain no fewer than two SIMMs of the same type. You may also install two SIMMs of the same type in bank 1 (socket U4 and U12, or U42 and U52); however, bank 0 must always contain the two largest size SIMMs.

Table 1-15	NPE-200 DRAM SIMM Memory Configurations
Total					Product Number1
DRAM	DRAM Bank 0	Quantity	DRAM Bank 1	Quantity
32 MB	U11 and U25	2 16-MB SIMMs	U42 and U52	—	MEM-NPE-32MB=
64 MB	U11 and U25	2 32-MB SIMMs	U42 and U52	—	MEM-NPE-64MB=
128 MB	U11 and U25	2 32-MB SIMMs	U42 and U52	2 32-MB	MEM-NPE-128MB=
				SIMMs

1.These products are also available as DRAM upgrades. For example to upgrade a network processing engine from 32 MB to 64 MB of DRAM, order product number MEM-NPE-64MB=.

Cisco 7200 VXR Installation and Configuration Guide

1-26 OL-5013-08