Chapter 1 Cisco 7200 VXR Product Overview
Table | ||
|
|
|
LED | Color | Function |
|
|
|
100 Mbps | Green | Indicates that the port is configured for |
|
| or if configured for autonegotiation (speed auto), the port has detected a |
|
| valid link at 100 Mbps. |
|
| Note If the port is configured for |
|
| configured for autonegotiation and the port has detected a valid |
|
| link at 10 Mbps, the LED remains off. |
|
|
|
LINK | Green | Indicates that the Ethernet/Fast Ethernet |
|
| a valid link with the network. This LED remains off during normal |
|
| operation of the router unless there is an incoming carrier signal. |
|
|
|
Input/Output Controller C7200-I/O-FE LEDs
Figure 1-25 shows the LEDs on the I/O controller with the Fast Ethernet port that is equipped with an MII receptacle and an RJ-45 receptacle (C7200-I/O-FE), and Table 1-29 lists the LEDs specific to this I/O controller model. Also see Table 1-24 for LEDs common to all I/O controllers.
Cisco 7200 VXR Installation and Configuration Guide
|
| ||
|
|