Cisco Systems 7200 VXR manual Fan Failures, NPE300boot# show environment all

Page 64

Chapter 1 Cisco 7200 VXR Product Overview

Functional Overview

Following is sample output of the show environment all command:

NPE300(boot)# show environment all

Power Supplies:

Power Supply 1 is empty.

Power Supply 2 is Zytek AC Power Supply. Unit is on.

Temperature readings:

chassis inlet

measured at 26C/78F

chassis outlet 1

measured at 28C/82F

chassis

outlet 2

measured at 29C/84F

chassis

outlet 3

measured at 33C/91F

Voltage readings:

 

 

 

 

+3.45

V

measured at

+3.46

V

+5.15

V

measured at

+5.25

V

+12.15

V

measured

at

+12.24

V

-11.95

V

measured

at

-11.81

V

Envm stats saved 138 time(s) since reload

Fan Failures

When the system power is on, all three fans should be operational. The system continues to operate if a fan fails; however, if the air temperature exceeds a defined threshold, the system controller displays warning messages on the console terminal, and if the temperature exceeds the shutdown threshold, the system controller shuts down the system.

If the system does shut down because the temperature exceeded the shutdown threshold, the system displays the following message on the console screen and in the environment display when the system restarts:

Queued messages:

%ENVM-1-SHUTDOWN: Environmental Monitor initiated shutdown

For complete descriptions and instructions for the environmental monitor commands, refer to the Configuration Fundamentals Configuration Guide and Configuration Fundamentals Command Reference publications, which are available on Cisco.com or the Documentation DVD.

Cisco 7200 VXR Installation and Configuration Guide

1-64

OL-5013-08

 

 

Page 63 Page 64
Image 64
Page 63 Page 64
Contents Cisco 7200 VXR Product Overview Cisco 7200 VXR Product Overview Physical Description Description Specification Software Requirements Cisco 7204VXR Router-Front View PWR OK LED Cisco 7204VXR Router-Rear ViewCisco 7206VXR Overview Cisco 7206VXR Router-Front View Cisco 7206VXR Router-Rear View Field-Replaceable Units Network Processing Engine or Network Services Engine Cisco 7200 VXR Product Overview Field-Replaceable Units Cisco 7200 VXR Product Overview Field-Replaceable Units Cisco 7200 VXR Product Overview Field-Replaceable Units Sdram GB DDR Sdram Memory Type Size Quantity DescriptionNvram GB Dimm Total Sdram Sdram Bank QuantityDimm On the NPE-G1 Memory Type Size Quantity Description BoardSdram Total Sdram Sdram Bank Quantity Product NumberMemory Type Size Quantity Description Location MEM-SD-NSE-256MB= MEM-SD-NPE-128MB=Sodimm J1 Total Sdram Bank Quantity Product Number SodimmMB Sodimm Memory Type Size Description Location1MEM-SD-NPE-32MB= Total Sdram Sdram Bank 1 Quantity Product NumberMEM-SD-NPE-64MB= Sdram Dimm U15 Sdram Dimm ROMDram SramTotal Dram Bank QuantityMEM-NPE-32MB= MEM-NPE-64MB=NPE-175 64 or 128 MB Sdram slot NPE-150 Memory Specifications Total Dram Dram Bank Quantity Quantity Product Number MEM-NPE-32MBMEM-NPE-64MB MEM-NPE-128MBInput/Output Controller Product Number Description910 84525 Temperature sensor Console port Captive installation screw Nvram U4184523 19 C7200-I/O-Without Fast Ethernet Port Version LED 20 C7200-I/O-Without Fast Ethernet Port Version21 C7200-I/O-FE-MII-With Single MII Fast Ethernet Receptacle LED Descriptions Type Size Quantity Memory Description Model LocationColor Status in the Power Up State NPE-G2 LEDsColor Function LED LabelColor NPE-G1 LEDsThere Is Traffic Input/Output Controller C7200-I/O LEDs Input/Output Controller C7200-I/O-GE+E LEDsInput/Output Controller C7200-I/O-2FE/E LEDs LinkInput/Output Controller C7200-I/O-FE LEDs RJ45 EN MII ENRJ45 Link FE Enable Port Adapters and Service AdaptersInput/Output Controller C7200-I/O-FE-MII LEDs Enable LED Port Adapter Jacket CardPower Supplies 28 Cisco 7200 Series AC-Input Power Supply OK LEDChassis CompactFlash Disks, Flash Disks, and PC Cards 30 Cisco 7200 VXR Chassis-7206VXR ShownMemory Size Rack-Mount and Cable-Management KitProduct Number1 Functional Overview Chassis Slot and Logical Interface Numbering32 Port Adapter Slot Numbering-Cisco 7206VXR Router# show interfaces MAC Address Online Insertion and RemovalCisco 7200 VXR Product Overview Functional Overview Environmental Monitoring and Reporting Functions Environmental MonitoringNPE-G1 Low Warning High Warning Shutdown NPE-G2 Low Warning High WarningParameter High Warning High Critical Shutdown High Warning High Critical Parameter Low CriticalParameter Low Critical High Critical Reporting Functions NPE300boot# show environment last NPE300boot# show environment all Fan Failures
Related manuals
Manual 188 pages 16.59 Kb

7200 VXR specifications

The Cisco Systems 7200 VXR Series is a robust and highly scalable modular router designed to meet the demands of service providers and enterprises seeking high-performance solutions for their network infrastructures. Launched as part of the Cisco 7200 series, the VXR (Virtual Extensible Routing) variant enhances capabilities while providing effective support for a wide range of applications, including Internet Protocol (IP) routing, Voice over IP (VoIP), and Virtual Private Network (VPN) configurations.

At the core of the 7200 VXR is its modular design, which enables network administrators to customize the router according to their specific needs. The router supports a variety of interface cards, processing engines, and power supply options, ensuring flexibility for diverse network environments. This modularity facilitates easy upgrades and expansions, making it ideal for growing enterprises and service providers looking to future-proof their networks.

One of the standout features of the Cisco 7200 VXR is its impressive routing performance. It can handle a high level of traffic with low latency, which is critical for bandwidth-intensive applications. The router supports a wide array of routing protocols, including Border Gateway Protocol (BGP), Open Shortest Path First (OSPF), and Integrated Intermediate System-to-Intermediate System (IS-IS), providing versatility for various network topologies.

The 7200 VXR also incorporates advanced features for enhanced security and reliability. With support for IPsec VPNs, it enables secure data transmission across untrusted networks. The router also includes features like Quality of Service (QoS) for prioritizing network traffic, ensuring critical applications receive the bandwidth they require even during peak loads.

In terms of scalability, the Cisco 7200 VXR can support hundreds of thousands of routes and MAC addresses, making it suitable for large metropolitan area networks (MANs) as well as enterprise backbone applications. It also provides the capability to support IPv4 and IPv6 networks, preparing organizations for a transition to next-generation internet protocols.

Additional characteristics of the Cisco 7200 VXR include enhanced manageability through the Cisco IOS software, which offers a comprehensive command-line interface and support for network management protocols. The router is also energy-efficient, with options for redundant power supplies that ensure continuous availability and minimal downtime in mission-critical applications.

Overall, the Cisco Systems 7200 VXR represents a powerful solution that combines performance, scalability, and security, making it an excellent choice for organizations looking to enhance their network capabilities in a rapidly evolving technological landscape.
Top Page Image Contents