Cisco Systems 7200 VXR manual Total Dram Dram Bank Quantity, MEM-NPE-32MB=

Chapter 1 Cisco 7200 VXR Product Overview

Field-Replaceable Units

Note To prevent DRAM errors in the NPE-100, NPE-150, or NPE-200, and to ensure that your system initializes correctly at startup, DRAM bank 0 (socket U18 and U25, or U11 and U25) must contain no fewer than two SIMMs of the same type. You may also install two SIMMs of the same type in bank 1 (socket U4 and U12, or U42 and U52); however, bank 0 must always contain the two largest size SIMMs.

Table 1-19	NPE-150 DRAM SIMM Memory Configurations
Total DRAM	DRAM Bank 0	Quantity	DRAM Bank 1	Quantity	Product Number1
32 MB	U18 and U25	2 16-MB SIMMs	U4 and U12	—	MEM-NPE-32MB=
64 MB	U18 and U25	2 32-MB SIMMs	U4 and U12	—	MEM-NPE-64MB=
128 MB	U18 and U25	2 32-MB SIMMs	U4 and U12	2 32-MB	MEM-NPE-128MB=
				SIMMs

1.These products are also available as DRAM upgrades. For example, to upgrade a network processing engine from 32 MB to 64 MB of DRAM, order product number MEM-NPE-64MB=.

Figure 1-14	NPE-100
		6
		7
1		8
		U12
		9
2		U4
		U25	10
		U18
		NETWORK PROCESSING ENGINE-100	66433
3	4	5

1	System controller	6	Midplane connectors
2	R4700 microprocessor	7	Temperature sensor
3	Captive installation screw	8	DRAM SIMMs
4	Handle	9	Bank 1
5	Temperature sensor	10	Bank 0

Table 1-20lists the NPE-100 network processing engine memory specifications, and Table 1-21lists memory configurations.

Cisco 7200 VXR Installation and Configuration Guide

1-30 OL-5013-08