Chapter 1 Cisco 7200 VXR Product Overview
Field-Replaceable Units
See Table 1-31, Table 1-32, and Table 1-33for the factory-installed Flash memory card options and their product numbers, the Flash Disk memory options and their product numbers, and the CompactFlash Disk memory options and their product numbers.
Configurations for flash memory cards, flash disks and CompactFlash Disks are in this section.
Table 1-31 Flash Memory Card Options
Product Number1
MEM-I/O-FLC16M=
MEM-I/O-FLC20M=
1.These products are also available as Flash memory card upgrades. To order an upgrade, add an equal sign (=) after the product number, for example, MEM-I/O-FLC16M=.
Table 1-32 Flash Disk Options
Product Number1
MEM-I/O-FLD64M=
MEM-I/O-FLD128M=
1.These products are also available as Flash Disk upgrades. To order an upgrade, add an equal sign (=) after the product number, for example, MEM-I/O-FLD128M=.
Table 1-33 CompactFlash Disk Options
Memory Size
64MB
128MB
256MB
Product Number
MEM-COMP-FLD64M=
MEM-COMP-FLD128M=
MEM-NPE-G2-FLD256=
Rack-Mount and Cable-Management Kit
The rack-mount and cable-management kit for the Cisco 7200 VXR routers consists of rack-mount and cable-management brackets that are designed for mounting your router in 19-inch, four-post or two-post equipment racks and for relieving strain on port adapter interface cables that are installed on port adapters in the router. The kit is shipped with each Cisco 7200 VXR router and is also available as a single FRU.
For detailed instructions about how to install the rack-mount and cable-management brackets on your Cisco 7200 VXR router, see Chapter 3, “Installing a Cisco 7200 VXR Router,” the “Rack-Mounting a Cisco 7200 VXR Router” section on page 3-2and the “General Tabletop or Workbench Installation” section on page 3-14.
Cisco 7200 VXR Installation and Configuration Guide