Cisco Systems AIRCAP2602IAK9 specifications 20A. Statement

Page 4

Warning

Warning

Warning

Warning

Caution

Caution

Note

Note

4

Installation of the equipment must comply with local and national electrical codes. Statement 1074

This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than:

20A. Statement 1005

Do not operate your wireless network device near unshielded blasting caps or in an explosive environment unless the device has been modified to be especially qualified for such use. Statement 245B

In order to comply with FCC radio frequency (RF) exposure limits, antennas should be located at a minimum of 7.9 inches (20 cm) or more from the body of all persons. Statement 332

The fasteners you use to mount an access point on a ceiling must be capable of maintaining a minimum pullout force of 20 lbs (9 kg) and must use all 4 indented holes on the mounting bracket.

This product and all interconnected equipment must be installed indoors within the same building, including the associated LAN connections as defined by Environment A of the IEEE 802.af Standard.

The access point is suitable for use in environmental air space in accordance with section 300.22.C of the National Electrical Code and sections 2-128, 12-010(3), and 12-100 of the Canadian Electrical Code, Part 1, C22.1. You should not install the power supply or power injector in air handling spaces.

Use only with listed ITE equipment.

Image 4
Contents Cisco Aironet 2600 Series Access Points Introduction to the Access Point About this GuideSafety Instructions Important Safety Instructions20A. Statement Unpacking ConfigurationsExternal Antennas Regulatory Domains Internal AntennasCountries Supported Access Point Ports and Connectors Access Point Ports and Connections topAccess Point LED Indicator top Configuring the Access Point Controller Discovery ProcessPage Preparing the Access Point Installation SummaryPerforming a Pre-Installation Configuration Pre-Installation Configuration SetupPage Page Mounting the Access Point Deploying the Access Point on the Wireless NetworkUsing Dhcp Option TroubleshootingChecking the Access Point LED LED Troubleshooting the Access Point Join Process Page Declarations of Conformity and Regulatory Information Models Vcci Statement for Japan 03-6434-6500 Statement 371-Power Cable and AC Adapter Industry CanadaModels Page Page Declaration of Conformity for RF Exposure Generic Discussion on RF ExposureThis Device Meets FCC Guidelines for Exposure to Radio Waves Additional Information on RF Exposure Chinese Translation English Translation Operation of Cisco Aironet Access Points in Brazil Declaration of Conformity Statements Portuguese TranslationConfiguring Dhcp Option 43 and Dhcp Option Access Point Specifications Add the option 60 line using the following syntaxObtaining Documentation and Submitting a Service Request 78-20842-01
Related manuals
Manual 38 pages 43.83 Kb