These antennas are supported on the 2602E:
Antenna Part Number | Antenna Type | Antenna Gain 2 GHz / 5 GHz |
|
| (dBi) |
|
|
|
2/4 | ||
|
|
|
2/4 | ||
|
|
|
2/4 | ||
|
|
|
2/4 | ||
|
| |
|
|
|
4/4 | ||
|
|
|
6/6 | ||
|
| |
|
|
|
Internal Antennas
The 2602I model access points are configured with up to four
There are four antennas deployed inside the access point with one deployed on each corner of the access point top housing. Each antenna covers both the 2.4 GHz and the 5 GHz bands with a single feed line. The basic features are as follows:
•
•Antenna unit integrated into 2602I model access points.
•Peak gain is approximately 4 dBi in the
Regulatory Domains
The 2600 series supports the following regulatory domains (shown as “x” in the model numbers):
•
Countries Supported
Click this URL to browse to a list of countries and regulatory domains supported by the 2600:
www.cisco.com/go/aironet/compliance
6