Cisco Systems OL-7822-06 quick start Enter Primary DNS IP address

Page 31

Chapter 4 Connect the Management Interfaces and Perform Initial System Configuration

Perform the Initial System Configuration

3.Type the default domain name to be used, and press press Enter.

4.Configure the primary domain name server .

5.Configure any additional domain name servers.

6.Exit the dialog.

DETAILED STEPS

Step 1 Enter the DNS settings menu.

Would you like to enter the DNS configuration menu? [no]: y

Type y and press press Enter.

The DNS settings dialog begins.

Step 2 Enable or disable DNS lookup.

•To enable DNS lookup, press press Enter.

•To disable DNS lookup, type n and press press Enter.

Enable IP DNS-based hostname translation? [yes]:

If you choose to disable DNS lookup, skip the rest of this section and go to . The rest of the dialog is not presented, as it is irrelevant when DNS lookup is disabled.

Step 3 Type the default domain name to be used, and press press Enter.

Note that there is no default domain name.

You may accept the default domain name or enter a new one.

Enter default domain name []:

Step 4 Configure the primary domain name server .

Type the IP address of the primary domain name server and press press Enter.

Enter Primary DNS IP address:

Note that there is no default for this parameter.

Step 5 Configure any additional domain name servers.

You may configure up to three domain servers.

Would you like to add another Name Server? [no]:

•To exit the DNS settings dialog, press press Enter.

•To add another domain server, type y and press press Enter.

You are asked to enter the IP address of the next domain name server.

Enter Secondary DNS IP address:

Step 6 Exit the dialog.

When IP addresses for all servers have been entered, exit the dialog by pressing press Enter.

Would you like to add another Name Server? [no]:

EXAMPLE:

Following is a sample DNS configuration dialog. The default domain name is pcube.com, and the IP address of the Domain Name Server is 10.1.1.230.

Cisco Service Control Engine 1000 2xGBE Quick Start Guide

 

OL-7822-06

4-11

 

 

 

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Cisco Service Control Engine 1000 2xGBE Quick Start Guide Page N T E N T S Example Example 2 Installing a Service Control Application OL-7822-06 Site Preparation and Unpacking Information About Preparing for InstallationPrepare for Rack-Mount Installation Workbench or Tabletop InstallationTools and Parts Prepare for Installation Workbench or Tabletop Installation OL-7822-06 SCE 1000 Mounting Brackets Rack-Mount the SCEAttaching the Mounting Brackets 4-post Attach the Brackets to the SCEAssemble the Crossrail Supports Installing the Crossrail Supports Four-post rack onlyAttach the Crossrail Supports to the Rack Mount the System to the RackSummary Steps Securing the SCE Platform to the Rack Connect the Chassis Ground Connect the Power Supply UnitsGrounding the Unit DC Connecting the PowerConnecting the DC Power Connect the DC-Input Power Supply UnitConnecting the AC Power Connect the AC-Input Power Supply UnitConnect the Local Console Connecting to the Local ConsoleInitial System Configuration Perform the Initial System ConfigurationSetup Command Setup Command Parameters Parameter Definition Example Configuring Initial SettingsSetting the Passwords Configuring the HostnameExample Configuring Time SettingsEnter time zone name UTC CET Enter time interval in seconds between unicast updates Configuring the DNS SettingsEnter Primary DNS IP address Configuring Access Control Lists ACLs Configuring the RDR Formatter DestinationInitial IP address Wildcard bits Range Deny Permit any Examples Configuring Snmp Enter the Snmp configuration menu Type the trap manager community string and press press Enter Enter Snmp trap manager community string About the Topology-Dependent Parameters Configuring the Topology-Dependent ParametersExample 1, Example 2, Example 3, Completing and Saving the Configuration Apply and Save this configuration? yes/no Examples Example Connect the Management InterfaceOL-7822-06 Single Link Inline Topology Information About CablingSingle Link Receive-only Topology Bump-in-the-Wire InstallationCabling the Line Interfaces Configure GigabitEthernet Auto-NegotiationConnect the GBE Line Interface Ports SCE Model Transceiver Transmit Power Receive Power DistanceCable the Line Ports Cabling the Line Interfaces OL-7822-06 Final Tests Examining the LEDsVerifying Operational Status Viewing the User Log Counters Saving the Configuration Settings Examples Following example shows the running configuration fileLoading and Activating a Service Control Application Advanced Configuration of the SCE PlatformOL-7822-06 SCE 1000 Operational Status Troubleshoot Startup ProblemsTroubleshoot Startup Problems SCE 1000 Operational Status CLI Commands for Troubleshooting Identifying Startup ProblemsTroubleshooting the link interface subsystem Page OL-7822-06

OL-7822-06 specifications

Cisco Systems OL-7822-06 is a comprehensive course offered within the Cisco Networking Academy, designed to equip students and professionals with a deep understanding of basic networking concepts and advanced networking technologies. This course primarily focuses on the required skills and knowledge needed for building, running, and maintaining networks and prepares participants for various roles in the IT and cybersecurity sectors.

One of the main features of the OL-7822-06 course is its thorough curriculum, which covers key topics such as networking fundamentals, including OSI and TCP/IP models, IPv4 and IPv6 addressing, and subnetting. It dives deep into network protocols, ensuring learners acquire a firm grasp of how data flows across networks, as well as the role of routers and switches in maintaining efficient network operations.

The course also emphasizes hands-on learning, leveraging various simulation tools and virtual labs that provide students with real-world scenarios to apply their knowledge practically. These labs are integral in helping learners understand the configuration and troubleshooting of network devices, enhancing their problem-solving skills in a controlled environment.

Another significant aspect of OL-7822-06 is its focus on emerging technologies. The course introduces students to concepts such as network security, cloud computing, wireless networking, and IoT (Internet of Things). This inclusion reflects the ever-evolving landscape of technology and prepares participants to be adaptable in the face of rapid change within the industry.

Additionally, the OL-7822-06 course promotes collaboration and peer engagement through group projects and discussions. This not only fosters a sense of community among learners but also enhances their communication skills, which are essential in modern IT environments.

The course is structured to accommodate various learning styles, offering a blend of theoretical knowledge and practical exercises. It provides assessments and quizzes that help gauge understanding and retention of information, ensuring students are well-prepared for certification exams and real-world applications.

In summary, Cisco Systems OL-7822-06 stands out as a robust educational offering that combines foundational networking principles with advanced technologies. Its focus on hands-on experience, collaboration, and the introduction of current industry trends makes it an invaluable resource for aspiring networking professionals, ultimately paving the way for a successful career in the tech industry.
Top Page Image Contents