Wi-Fi
For an Access Point device, select the Access Point radio button; then, indicate Enabled if you want the Wi-Fi Network enabled, or selected Disabled to disable the Wi-Fi Network, for each SSID on your network. If you are ready to pair devices, go to the Pair Devices (see "Connect Devices" on page 41) section. Otherwise, skip to the last step.
For repeater mode, select the Wi-Fi Range Extension radio button; then, configure the fields on the page once it refreshes.
–Name (SSID)—This field is auto-populated with the name of the associated Access Point. If you want to enter a different SSID, click the Add SSID manually check box; then, enter the SSID you wish to configure.
–Add SSID manually—Select this option to make the Name (SSID) field configurable.
–Security Mode— Select the security mode of the associated Access Point, Disabled, WPA, or WPA2. If you select WPA or WPA2, the Passphrase field appears.
–Passphrase—Enter the passphrase of the associated Access Point.
3Click Save Changes to save the information or Cancel to return to the dashboard.
