VoIP Settings
bClick the Move Right arrow to move the selected item to the Enabled Codec list.
cUse the Up/Down buttons to prioritize the Enabled Codecs.
dSelect the top Codec in the Enabled list. The Codec Properties fields become active.
eComplete the Codec Properties fields associated with the Codec selected:
–Payload Type—This value is pre-populated with a default setting. The field will not be configurable if the default value is a required setting for the codec selected.
–Name—Provide a name to identify the codec type.
–Frame Size in ms—Select a setting to configure interval between sending RTP packets out to the RTP stream.
–Bit Rate—Select the data transmission rate from the list of available options.
fDTMF Relay Method—Select one of the following methods by which DTMF digits will be passed during a voice call:
–In Band—Select In Band mode to use the voice band when a key is pressed during a voice call.
–Out of Band—Select Out of Band mode to use an independent band when a key is pressed during a voice call. If you select this option, the RFC2833 Payload Type field will appear for your to enter a value to configure the RFC 2833 payload decimal.
–SIP Info—Select SIP Info if you want a key press to be sent remotely through SIP packets during a voice call.
6Click Save Changes to save the information or Cancel to return to the dashboard.