Cisco Systems TES301 manual Wi-Fi

Wi-Fi





If your client device has a Wi-Fi Protected Setup button, then:

–Click or press the Wi-Fi Protected Setup button on the client device.

–Click the Wi-Fi Protected Setup button on this screen.

–After the client device has been configured, click OK button. Then refer back to your client device or its documentation for further instructions.

If your client device has a Wi-Fi Protected Setup PIN, then:

–Enter the PIN number in the field on this screen.

–Click Register button.

–After the client device has been configured, click OK button. Then refer back to your client device or its documentation for further instructions.

If your client device requests the Router's PIN, enter the PIN number listed on this screen. (It is also listed on the label on the bottom of the Router).

5After the client device has been configured, click OK button. The Wi-Fi Protected Setup Status, Network Name (SSID), Security, Encryption, and Passphrase are displayed at the bottom of the screen.

6Refer to your client device or its documentation for further instructions.

4038767 Rev A 43