Cisco Systems SOHO 71 manual Cabling Specifications, Ethernet Cable Specifications

Page 50

Chapter A Specifications and Cables

Cabling Specifications

The Console port is configured as a data communications equipment (DCE) device. The default parameters for the console port are as follows:

•9600 baud

•8 data bits

•No parity

•One stop bit

Table 0-4 Power Connector Pinouts

Pin	Function

1	ROF

2	RTN

3	N.C.

4	N.C.

5	+5

6	RTN

7	N.C.

8	N.C.

Cabling Specifications

This section provides specifications for the following Ethernet cables, which you might need to provide:

•Straight-through

•Crossover

It also provides information on Ethernet cable distance limitations.

Ethernet Cable Specifications

Table 0-5provides the specifications for straight-through and crossover Ethernet cables.

	Cisco 806 Router and SOHO 71 Router Hardware Installation Guide
A-4	78-10432-04

Image 50

Contents Corporate Headquarters Page Copyright 2005 Cisco Systems, Inc. All rights reserved Page N T E N T S Installation Vii Viii Audience OrganizationConventions Related Documentation Documentation DVD Obtaining DocumentationCisco.com Documentation Feedback Ordering DocumentationReporting Security Problems in Cisco Products Cisco Product Security OverviewObtaining Technical Assistance Cisco Technical Support WebsiteSubmitting a Service Request Definitions of Service Request Severity Obtaining Additional Publications and InformationXviii Features Feature Routers DescriptionRouter Overview Router LAN Ethernet Ports WAN Ethernet Port Console PortFront Panel Back Panel4shows the back panel of the Soho 71 router LEDs Color FunctionProduct Overview Router Overview Preparing for Installation SafetyBefore installing the router, read the following warnings Preventing Electrostatic Discharge Damage Unpacking the Box Installing Your Router Preventing Router DamageNetwork Device Router Button Ethernet Cable Connecting Ethernet DevicesConnected to Router Setting Router Port Type Button Setting Connecting a Hub Connecting a Server, PC, or Workstation Connecting to the Internet Connecting a Broadband ModemConnecting a Terminal or PC to the Console Port Connecting an Ethernet SwitchConnecting the AC Adapter Connecting a Terminal or PCConnecting the AC adapter Verifying Router OperationPower/Link LEDs to Check Normal Patterns Mounting Your RouterMounting on Table Mounting on WallInstallation Mounting Your Router Mounting Router on Wall Connecting to a Website Starting the Crws SoftwareInstallation What to Do If You Cannot Connect to a Website Troubleshooting Before You Call Your Cisco ResellerProblems During Initial Startup Symptom Problem SolutionsProblems After Router Is Running , InstallationTroubleshooting Problems After Router Is Running Environmental Operating Ranges System SpecificationsDescription Design Specification Physical Dimensions Laws and regulations Port Connector PinoutsDescription Design Specification Router Power Function To HUB/TO PC Button Pin Position OUT Position Pin FunctionCabling Specifications Ethernet Cable SpecificationsCable Maximum Distance Maximum Cable DistanceType Category Shielding Chapter a Specifications and Cables Cabling Specifications Numerics IN-2 IN-3 IN-4