Billion Electric Company 6404VGP, 6404VP Setting for Phone Port, How to register to SIP Server

Page 65
How to register to SIP Server

VoIP/(802.11g) Broadband Firewall Router

device must work. When a country is selected, the country parameters are automatically loaded.

Voice QoS,: Differentiated Services Code Point (DSCP), it is the first 6 bits in the ToS byte. DSCP Marking allows users to assign specific application traffic to be executed in priority by the next Router based on the DSCP value. See Table 4. The DSCP Mapping Table:

Note: To be sure the router(s) in the backbones network have the capability in executing and checking the DSCP through-out the QoS network.

Setting for Phone Port 1

Registrar Address(or Hostname): Indicate the VoIP SIP registrar IP address.

Registrar Port: Specify the port of the VoIP SIP registrar on which it will listen for register requests from VoIP device.

Expire: Expire time for the registration message sending.

User Domain/Realm: Set different domain name for the VoIP SIP proxy server.

Outbound Proxy Address: Indicate the VoIP SIP outbound proxy server IP address. This parameter is very useful when VoIP device is behind a NAT.

Outbound Proxy Port: Specify the port of the VoIP SIP outbound proxy on which it will listen for messages.

Setting for Phone Port 2

Please refer to descriptions in “Setting for Phone Port 1”.

How to register to SIP Server

1)In Wizard Section, select your VoIP Service Provider and input information in the filed of Phone Number, Authentication Username and Authentication Password.

2)In Wizard Section, click Apply button to apply the settings.

3)In General Settings, make sure general VoIP SIP information are correctly inserted.

4)In General Settings, click Apply button to apply the settings.

5)In General Settings, click Synch Now button to register the account(s) with your VoIP server.

Advanced – Parameters

VoIP through IP Interface: IP Interface decides where to send/receive the voip traffic; it includes: ipwan and iplan. Easy way to select the interface is to check the location of the SIP server. If it locates some where in the Internet then select ipwan. If the VoIP SIP server is on the local Network then select iplan.

Voice Frame Size: Frame size is available from 10ms to milliseconds the Voice packets will be queued and sent out. both of Caller and Receiver.

60ms. Frame size meaning how many It is ideal to have the same frame size in

PSTN Auto-fallback:Whenever VoIP SIP responses error and error code matching with the codes in the Edit section, the VoiP calls will automatically fallback to PSTN. In the other word, the call will be called via the PSTN when VoIP SIP returns an error code.

64

Chapter 4: Configuration

Page 64 Page 66
Image 65
Page 64 Page 66
Contents VoIP/802.11g Broadband Firewall Router BiPAC 6404VP / 6404VGPUser’s Manual Version Release 5.08aTable of Contents QoS Quality of Service Firewall and Access ControlCHAPTER 5 TROUBLESHOOTING VoIP Voice over Internet ProtocolChapter 1 Introduction FeaturesIntroduction to your Router 802.11g Wireless AP with WPA SupportDynamic Host Configuration Protocol DHCP client and server Quality of Service QoSNetwork Address Translation NAT SOHO Firewall Security with DoS and SPIRich Management Interfaces Firmware UpgradeableImportant note for using this router Chapter 2 Installing the RouterPackage Contents Do not use the same power source for this router as other equipmentRJ-45 connector The Front LEDsWireless Router Only RJ-11 connectorPort Power Switch PWR RESET The Rear PortsWAN LAN Phone 1XCabling Chapter 3 Basic Installation Chapter 3 Basic InstallationATA Mode Broadband Router Mode Connecting Your Router4. Select Internet Protocol TCP/IP and click Properties. See Figure Configuring PCs in Windows in Window XP2. Double-click Local Area Connection. See Figure 4. Select Internet Protocol TCP/IP and click Properties See Figure Configuring PCs in Windows2. Double-click Local Area “LAN” Connection. See Figure 3. Click Properties Configuring PC in Windows 95/98/ME5. Then select the DNS Configuration tab. See Figure 2. Select TCP/IP Protocol and click Properties. See Figure Configuring PC in Windows NT4.0Web Interface Username and Password Factory Default SettingsDevice LAN IP settings ISP setting in WAN sitePPPoE Information from your ISPDHCP Obtain an IP Address Automatically Static IP Fixed IP Address Configuring with your Web Browser ATA / Router Mode Configuration Chapter 4 ConfigurationSave Config to FLASH StatusStatus Wireless Association Table Wireless Router OnlyARP Table Routing TableRIP Routing Table DHCP TableLeased Table Expired TableVoIP Status Email StatusEvent Log Error LogNAT Sessions DiagnosticUPnP Portmap ATA / Router Mode LAN NAT DHCP Server Device IP WAN System Firewall QoS Virtual Server FunctionsTime Schedule Advanced VoIP RouterLAN Local Area Network ConfigurationEthernet Primary IP AddressIP Alias Ethernet Client Filter → Active PC in LANEthernet Client Filter Default setting is set to Disable Active PC in LAN displays a list of individual Ethernet device’s IP Address & MAC Address which connecting to the router Parameters Wireless Wireless Router OnlyWireless Distribution System WDS WPA-PSK TKIP / WPA-PSK AES Pre-Shared Key Wireless Security Wireless Router OnlyPage →Associated Wireless Clients Wireless Client / MAC Address Filter Wireless Router OnlyWireless Client Filter Default setting is set to Disable DHCP Server Time Zone SystemRemote Access Firmware Upgrade Backup / Restore Restart Router User Management Firewall and Access Control General Settings Packet Filter Table 1 Predefined Port Filter Example Predefined Port Filters RulesApplication ProtocolUDP17 Packet Filter - Add TCP/UDP Filter Packet Filter - Add Raw IP Filter Page Click Add TCP/UDP Filter Click DeleteExample Configuring Packet Filter5. The new port filter rule for HTTP is shown below Block Duration Intrusion DetectionIntrusion Name Table 2 Hacker attack types recognized by the IDSDetect Parameter Ascend KillAlways On URL Filterdropped IM / P2P Blocking Instant Message Blocking The default is set to DisabledPeer to Peer Blocking The default is set to Disabled Log information can be seen in the Status - Event Log after enabling Firewall LogVoIP Broadband Firewall Router VoIP Voice over Internet ProtocolVoice QoS Setting for Phone PortWizard NOTE User defined profiles are limited to 8 only Authentication Username Same as Phone NumberUser-defined Profiles SIP Device Parameters Advanced - Parameters How to register to SIP ServerNote ONHOOK means hung up Advanced - PSTN Environment AdjustmentPhone Port Login Account ConfigurationVolume Control For examplesCodec Preference Speed DialPSTN Dial Plan 3 Dial at Timeout PSTN Dial Plan Examples4 Dial at Timeout no Prefix 1 Dial with PrefixVoIP/802.11g Broadband Firewall Router VoIP Dial Plan Prefix Processing Dial Plan Rules ListDescription Dial-Plan ExamplesSpecial Dial Plan Examples ## xxLocalcheap.com is the default VoIP provider I set on phone port 1. When I call out any number start with 1 or 2 or 3 and plus rest of the phone number for local call, 03 is always prepended in front of these number. If 23295 are dialed, 03-2-32935 is the actual phone number called out via localcheap.com provider Mobilecheap.com is the default VoIP provider I set on phone port 2. When I call out 123-39-45678 for a mobile call, 123 is replaced with 09. Therefore, 09-39-45678 is the actual phone number called out via Mobilecheap.com provider Country Specific Ring & Tone Ring & ToneRing Parameters Tone ParametersFlash-hook Special Dial CodesOption Click Clear QoS Quality of ServicePrioritization HighDSCP Mapping Table Table 4 DSCP Mapping TableWireless Router Device Standard DSCPOutbound IP Throttling LAN to WAN Inbound IP Throttling WAN to LAN Connection Diagram VoIP Normal PCs Restricted PCInformation and Settings Example QoS for your NetworkMission-critical application Advanced setting by using IP throttlingVoice application Restricted ApplicationVoIP/802.11g Broadband Firewall Router Virtual Server “Port Forwarding” Internal IP Add Virtual ServerIP Address ExampleEdit DMZ Host Global IP Address Edit One-to-One NAT Network Address TranslationSelect the Apply button to apply your changes Example List of some well-known and registered port numbers Table 5 Well-known and registered PortsPort Number ProtocolTime Schedule Configuration of Time Schedule Click EditEdit a Time Slot Delete a Time SlotManagement and IGMP Static Route AdvancedDynamic DNS Check Email Embedded Web Server 2 Management IP accounts Device ManagementSNMP V1 and Universal Plug and Play UPnPSNMP SNMP Version SNMPv2c and SNMPv3From RFC 1493 Bridge MIB From RFC1650 EtherLike-MIBFrom RFC 1471 PPP/LCP MIB From RFC 1472 PPP/Security MIBIGMP Save Configuration to FlashLogout Problems starting up the router Chapter 5 TroubleshootingProblems with the LAN Interface ProblemContact Billion WORLDWIDE APPENDIX A Product Support and Contact Information
Top Page Image Contents