Billion Electric Company 400G manual PPPoA Connection

Page 38

Billion 400G Router

Idle Timeout: Auto-disconnect the router when there is no activity on the line for a predetermined period of time.

Detail: You can define destination port and packet type (TCP/UDP) information that will not result in the router checking the timer. It allows you to set which outgoing traffic will not trigger and reset the idle timer.

MTU: Maximum Transmission Unit. The size of the largest datagram (excluding media-specific headers) that IP will attempt to send through the interface.

RIP: RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function.

TCP MSS Clamp: This option helps to discover the optimal MTU size automatically. Default is enabled.

MAC Spoofing: This option is required by some service providers. You must fill in the MAC address that has been specified by the service provider when it is required. Default is disabled.

Obtain DNS: A Domain Name System (DNS) contains a mapping table for mapping between Domain Names and IP addresses. On the Internet, every host has a unique and user-friendly name (domain name) such as www.helloworld.com as well as an IP address. An IP address is a 32-bit number in the form of xxx.xxx.xxx.xxx, for example 10.0.0.2. You can think of an IP address as a telephone number for devices on the Internet, and the DNS will allow you to find the telephone number for any particular domain name. As an IP Address is hard to remember, the DNS converts the friendly name into its equivalent IP Address.

You can obtain a Domain Name System (DNS) IP address automatically if your ISP provides it when you logon. To use this automatically supplied DNS check the Enable box.

Primary DNS: Enter the primary DNS.

Secondary DNS: Enter the secondary DNS

PPPoA Connection

Profile Port: Select the profile port ADSL.

Protocol: The ATM protocol will be used in the device.

Description: User-definable name for the connection.

VPI/VCI: Enter the information provided by your ISP.

ATM Class: The Quality of Service for ATM layer.

Username: Enter the username provided by your ISP. You can input up to 128 alphanumeric characters (case sensitive). This will usually be in the format of “username@ispname” instead of simply “username”.

Password: Enter the password provided by your ISP. You can input up to 128 alphanumeric characters (case sensitive).

35

Chapter 4: Configuration

Image 38

Contents Page Table of Contents Table of Contents Features Introduction to your RouterVirtual Server port forwarding Dynamic Host Configuration Protocol Dhcp Client and ServerFirmware Upgradeable Rich Packet FilteringImportant note for using this router Package ContentsFront LEDs Power LAN Port 1XWireless Mail InternetAntenna 1X 4X RJ-45 connectorRear Ports Cabling Basic Installation Connecting Your Router Double-clickLocal Area Connection. See Figure Select Internet Protocol TCP/IP and click Properties. SeeConfiguring PCs in Windows Configuring PC in Windows 95/98/ME Then select the DNS Configuration tab. See FigureGo to Start / Settings / Control Panel. In the Control Panel Select TCP/IP Protocol and click Properties. See FigureFactory Default Settings Information from your ISP PPPoAConfiguring with your Web Browser 14 User name & Password Prompt WindowQuick Start Configuration StatusARP Table StatusAdsl Status Leased Table Dhcp TableRouting Table Routing TableEmail Status NAT SessionsUPnP Portmap Event Log Error LogDiagnostic Quick Start Billion 400G Router Billion 400G Router Bridge Interface ConfigurationLAN Local Area Network Primary IP Address EthernetIP Alias → Active PC in LAN Ethernet Client Filter Default setting is set DisableEthernet Client Filter Wireless ParametersWireless Distribution System WDS Wireless Security WPA-PSK / WPA2-PSK / WEPWEP Associated Wireless Clients Wireless Client / MAC Address FilterWireless Client Filter Default setting is set to Disable Port Setting WPSDhcp Server Connection WAN Wide Area NetworkWAN Profile PPPoA Connection Billion 400G Router MPoA Connection IPoA Routed Connection Pure Bridge All PPPoEAdsl Mode System Time ZoneRemote Access Firmware UpgradeBackup / Restore Restart Router User ManagementBillion 400G Router Firewall and Access Control Changed General SettingsThis with caution when connecting over the WAN Packet Filter Example Predefined Port Filters Rules Packet Filter Add TCP/UDP Filter Packet Filter Add Raw IP Filter Billion 400G Router Configuring Packet Filter Example Intrusion Detection Block DurationBillion 400G Router Show Log Intrusion Name Detect Parameter BlacklistType of Block Drop Packet Duration URL Filter Billion 400G Router IM / P2P Blocking Instant Message Blocking The default is set to DisabledPeer to Peer Blocking The default is set to Disabled Prioritization QoS Quality of ServiceFirewall Log HighWireless Adsl Router Standard Dscp Dscp Mapping TableOutbound IP Throttling LAN to WAN Inbound IP Throttling WAN to LAN Connection Diagram Information and SettingsMission-critical application Restricted Application Billion 400G Router Virtual Server known as Port Forwarding Add Virtual ServerBillion 400G Router Add Click it to apply your settings ExampleGo to ConfigurationVirtual ServerEdit DMZ Host Edit DMZ HostGlobal IP Address Go to ConfigurationVirtual ServerEdit One-to-one NATEdit One-to-One NAT Network Address Translation Protocol Description Port NumberWell-known and registered Ports Time Schedule Delete a Time Slot Configuration of Time ScheduleEdit a Time Slot Static Route Go to Configuration/Advanced/Static RouteAdvanced Dynamic DNS Dynamic DNSCheck Email Check EmailDevice Management From RFC 1213 MIB-II Universal Plug and Play UPnPSnmp V1 From RFC 1471 PPP/LCP MIB From RFC1650 EtherLike-MIBFrom RFC 1493 Bridge MIB From RFC 1472 PPP/Security MIBVlan Bridge DisableLogout Problems with the LAN Interface Problems starting up the routerProblems with the WAN Interface Contact Telkom Adsl support Contact SizweBroadband for Router Support