Billion 400G Router
Edit One-to-One NAT (Network Address Translation)
If you have multiple public/WAN IP addresses provided by your ISP, you are will be able to use the
Go to ConfigurationVirtual ServerEdit One-to-one NAT
NAT Type: Select the desired NAT type. By default, the
Global IP Address:
Subnet: The subnet of the public/WAN IP addresses given by your ISP. If your ISP has provided this information, you may insert it here. Otherwise, use the IP Range method to define your addresses.
IP Range: The IP address range of your public/WAN IP addresses. For example, IP: 10.0.0.5, end IP: 10.0.0.14
Select the Apply button to apply your changes.
Check to create a new
Application:
: 20 predefined rules are available. Application, Protocol and External/Redirect Ports will be filled after the selection.
Protocol: This is the protocol to be supported by the virtual server. In addition to specifying the port number to be used, you will also need to specify the protocol used. The protocol used is determined by the particular application. Most applications will use TCP or UDP.
Time Schedule: The
Global IP: Define a public/ WAN IP address for this Application to use.
73
Chapter 4: Configuration