Billion Electric Company 400G manual MPoA Connection

Page 40

Billion 400G Router

MPoA Connection

Profile Port: Select the profile port ADSL.

Protocol: The ATM protocol will be used in the device.

Description: User-definable name for the connection.

VPI/VCI: Enter the information provided by your ISP.

ATM Class: The Quality of Service for ATM layer.

NAT: The NAT (Network Address Translation) feature allows multiple users to access the Internet through a single IP account, sharing a single IP address. If users on your LAN have public IP addresses and can access the Internet directly, the NAT function can be disabled.

Encap. mode: Select the encapsulation format, this is provided by your ISP.

MTU: Maximum Transmission Unit. The size of the largest datagram (excluding media-specific headers) that IP will attempt to send through the interface.

IP (0.0.0.0:Auto): Enter the WAN IP for the router. Leave this at 0.0.0.0 to obtain an IP address automatically from your ISP.

Netmask: The default is 255.255.255.0. This can be changed according to the settings assigned by you ISP.

Gateway: Enter the IP address of the default gateway (if specified).

RIP: RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function.

TCP MSS Clamp: This option helps to discover the optimal MTU size automatically. Default is enabled.

MAC Spoofing: This option is required by some service providers. You must fill in the MAC address that has been specified by the service provider when it is required. Default is disabled.

Obtain DNS: A Domain Name System (DNS) contains a mapping table for mapping between Domain Names and IP addresses. On the Internet, every host has a unique and user-friendly name (domain name) such as www.helloworld.com as well as an IP address. An IP address is a 32-bit number in the form of xxx.xxx.xxx.xxx, for example 10.0.0.2. You can think of an IP address as a telephone number for devices on the Internet, and the DNS will allow you to find the telephone number for any particular domain name. As an IP Address is hard to remember, the DNS converts the friendly name into its equivalent IP Address.

You can obtain a Domain Name System (DNS) IP address automatically if your ISP provides it when you logon. To use this automatically supplied DNS check the Enable box.

Primary DNS: Enter the primary DNS.

Secondary DNS: Enter the secondary DNS.

37

Chapter 4: Configuration

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Page Table of Contents Table of Contents Features Introduction to your RouterDynamic Host Configuration Protocol Dhcp Client and Server Firmware UpgradeableVirtual Server port forwarding Rich Packet FilteringImportant note for using this router Package ContentsPower LAN Port 1X Wireless MailFront LEDs InternetRear Ports 1X 4X RJ-45 connectorAntenna Cabling Basic Installation Connecting Your Router Double-clickLocal Area Connection. See Figure Select Internet Protocol TCP/IP and click Properties. SeeConfiguring PCs in Windows Configuring PC in Windows 95/98/ME Then select the DNS Configuration tab. See FigureGo to Start / Settings / Control Panel. In the Control Panel Select TCP/IP Protocol and click Properties. See FigureFactory Default Settings Information from your ISP PPPoAConfiguring with your Web Browser 14 User name & Password Prompt WindowQuick Start Configuration StatusAdsl Status StatusARP Table Dhcp Table Routing TableLeased Table Routing TableUPnP Portmap NAT SessionsEmail Status Diagnostic Error LogEvent Log Quick Start Billion 400G Router Billion 400G Router LAN Local Area Network ConfigurationBridge Interface IP Alias EthernetPrimary IP Address Ethernet Client Filter Ethernet Client Filter Default setting is set Disable→ Active PC in LAN Wireless ParametersWireless Distribution System WDS Wireless Security WPA-PSK / WPA2-PSK / WEPWEP Wireless Client Filter Default setting is set to Disable Wireless Client / MAC Address FilterAssociated Wireless Clients Port Setting WPSDhcp Server WAN Profile WAN Wide Area NetworkConnection PPPoA Connection Billion 400G Router MPoA Connection IPoA Routed Connection Pure Bridge All PPPoEAdsl Mode System Time ZoneRemote Access Firmware UpgradeBackup / Restore Restart Router User ManagementBillion 400G Router Firewall and Access Control This with caution when connecting over the WAN General SettingsChanged Packet Filter Example Predefined Port Filters Rules Packet Filter Add TCP/UDP Filter Packet Filter Add Raw IP Filter Billion 400G Router Configuring Packet Filter Example Intrusion Detection Block DurationBillion 400G Router Type of Block Drop Packet Duration Intrusion Name Detect Parameter BlacklistShow Log URL Filter Billion 400G Router Peer to Peer Blocking The default is set to Disabled Instant Message Blocking The default is set to DisabledIM / P2P Blocking QoS Quality of Service Firewall LogPrioritization HighWireless Adsl Router Standard Dscp Dscp Mapping TableOutbound IP Throttling LAN to WAN Inbound IP Throttling WAN to LAN Connection Diagram Information and SettingsMission-critical application Restricted Application Billion 400G Router Virtual Server known as Port Forwarding Add Virtual ServerBillion 400G Router Add Click it to apply your settings ExampleGo to ConfigurationVirtual ServerEdit DMZ Host Edit DMZ HostEdit One-to-One NAT Network Address Translation Go to ConfigurationVirtual ServerEdit One-to-one NATGlobal IP Address Well-known and registered Ports Port NumberProtocol Description Time Schedule Edit a Time Slot Configuration of Time ScheduleDelete a Time Slot Advanced Go to Configuration/Advanced/Static RouteStatic Route Dynamic DNS Dynamic DNSCheck Email Check EmailDevice Management Snmp V1 Universal Plug and Play UPnPFrom RFC 1213 MIB-II From RFC1650 EtherLike-MIB From RFC 1493 Bridge MIBFrom RFC 1471 PPP/LCP MIB From RFC 1472 PPP/Security MIBLogout DisableVlan Bridge Problems with the WAN Interface Problems starting up the routerProblems with the LAN Interface Contact Telkom Adsl support Contact SizweBroadband for Router Support

400G specifications

Billion Electric Company, a prominent player in the telecommunications and networking industry, has made significant strides with its new 400G solutions that stand out due to their innovative features and technologies. The 400G technology is designed to meet the ever-increasing demand for higher bandwidth and faster data transfer speeds, particularly in data centers, enterprise networks, and service providers.

One of the main features of Billion Electric's 400G offering is its scalability. The architecture supports a range of interfaces and can be easily integrated into existing networks, allowing for smooth upgrades from lower-capacity systems. This adaptability ensures that businesses can accommodate future growth without overhauling their entire infrastructure.

The 400G solutions utilize advanced photonic technology, which enhances data transmission by reducing latency and maximizing throughput. This is particularly beneficial for applications such as cloud computing, big data analytics, and high-definition video streaming, where speed and reliability are paramount. Moreover, Billion Electric employs cutting-edge modulation techniques and optical networking solutions, ensuring robust performance even at high data rates.

Another noteworthy aspect of Billion Electric’s 400G technology is its energy efficiency. In an era where sustainability is crucial, the company has developed solutions that not only provide high performance but also minimize energy consumption. The integration of AI-based network management tools further enhances operational efficiency by optimizing resource allocation and reducing operational costs.

In terms of network resilience, Billion Electric's 400G solutions feature built-in redundancy and failover capabilities. This ensures that essential services remain uninterrupted, which is critical for industries relying on continuous connectivity. Additionally, security protocols are embedded within the system, offering enhanced protection against potential cyber threats.

Furthermore, Billion Electric provides comprehensive support and training, empowering businesses to effectively transition to 400G technology. With a focus on customer satisfaction and operational excellence, the company positions itself as a trusted partner in the ever-evolving telecommunication landscape.

In summary, Billion Electric’s 400G solutions are characterized by their scalability, advanced photonic technology, energy efficiency, network resilience, and robust support. These features collectively cater to the modern demands of high-speed networking, setting a new standard in performance and reliability for telecommunications infrastructure. As digital transformation accelerates, Billion Electric continues to innovate, leading the way in the next generation of connectivity.
Top Page Image Contents