Cisco Systems 1900 Series manual Chassis Ventilation, Real-Time Clock, Chassis Security, Console

Page 28

Chapter 1 Overview of the Router

Hardware Features

Table 1-4

Summary of Cisco 1900 Series LED Indicators (continued)

 

 

 

 

 

 

LED

 

Color

Description

Location

 

 

 

 

 

EN (RJ-45

 

Green

The RJ-45 console port is active.

Rear panel,

console port)

 

 

 

next to the

 

 

 

 

console

 

 

 

 

port

 

 

 

 

 

EN (USB serial

 

Green

The USB console port is active.

Rear panel,

console port)

 

 

 

next to the

 

 

 

 

USB

 

 

 

 

console

 

 

 

 

port

 

 

 

 

 

1.SSID = Service Set Identifier

2.eUSB = embedded USB

Chassis Ventilation

An internal fan provides chassis cooling. An onboard temperature sensor controls the fan speed. The fan is always on when power is applied to the router. Under most conditions, the fan operates at the slowest speed to conserve power and reduce fan noise. It operates at the higher speeds when necessary under conditions of higher ambient temperature. See the “Chassis Airflow Diagram” section on page 4-3.

Real-Time Clock

An internal real-time clock with battery backup provides the system software with time of day on system power up. This allows the system to verify the validity of the certification authority (CA) certificate. The Cisco 1900 series router has a lithium battery. This battery lasts the life of the router under the operating environmental conditions specified for the router, and is not field-replaceable.

Note If the lithium battery in a Cisco 1900 ISR should fail, the router must be returned to Cisco for repair.

Although the battery is not intended to be field-replaceable, the following warning must be heeded:

Warning Dispose of used batteries according to the manufacturer’s instructions. Statement 1015

Chassis Security

The chassis of the router is constructed with a KensingtonTM security slot on the back panel. It can be secured to a desktop or other surface by using KensingtonTM lockdown equipment.

Wireless LAN Connectivity

The embedded Wi-Fi CERTIFIED™, 802.11a/b/g/n-compliant wireless access point is preinstalled in the router as an optional feature. The Cisco 1900 series routers support both autonomous and unified features and network configurations.

 

Cisco 1900 Series Hardware Installation

1-12

OL-19084-02

Image 28
Contents Americas Headquarters Text Part Number OL-19084-03Page OL-19084-03 Console and Auxiliary Port Considerations Chassis Airflow Diagram Configuring the Auxiliary Line Objectives AudienceOrganization ConventionsSection Title Description Convention IndicationBewaar Deze Instructies Avvertenza Importanti Istruzioni Sulla Sicurezza Warnung Wichtige SicherheitshinweiseAviso Instruções Importantes DE Segurança Guarde Estas Instrucciones GEM Disse Anvisninger Xiii Xiv Related Documentation Obtaining Documentation and Submitting a Service Request Searching within Cisco DocumentsSafety Warnings Overview of the RouterChassis Views Safety Warnings for Finland, Norway and SwedenSYS ACT PoE12 Cisco Antenna mounts1 LEDs2 SYS ACTWlan 4 or 5 GHzHardware Features Overview of the Router Hardware FeaturesProduct Serial Number Location CleiBuilt-In Interfaces Cisco Product Identification ToolProduct ID PID Compliance label CleiRemovable, Interchangeable, and Optional Modules Interface DescriptionUSB Such as security tokens and flash memoryMemory External Modules In chassis slots Internal ModulesSeries 1905 1921 DramColor Description Location LED IndicatorsSYS ISM/WLAN Wireless LAN Connectivity Chassis VentilationReal-Time Clock Chassis SecurityBaud Reset Button Interface NumberingSlot Number Slot Type Slot Numbering Range Onboard Ports 10/100/1000 EthernetDescription Specification Physical SpecificationsPower Description Specification PortsTransportation and Storage Environment AcousticTIA/EIA/IS-968 CNS Regulatory Compliance ITU-T G.823, G.824Safety Recommendations General GuidelinesSafety with Electricity General Site Requirements Preventing Electrostatic Discharge DamageSite Configuration Power Supply ConsiderationsSite Environment Installation Checklist Wireless LAN ConsiderationsInspecting the Router Task Verified byInstallation Checklist for Site Router Name Site LogTask Verified by Date Router quick start guide receivedCisco 1900 Series Hardware Installation OL-19084-02 OL-19084-02 About Console and Auxiliary Ports Console and Auxiliary Port ConsiderationsConsole Port Connections USB Serial Console EIA/TIA-232 PortUSB Console OS Compatibility Preparing to Connect to a Network Auxiliary Port ConnectionsEthernet Connections Serial ConnectionsConfiguring Serial Connections Signaling Standards SupportedAbout Serial Connections Serial DTE or DCE DevicesTransmission Speeds and Distance Limitations Asynchronous/Synchronous Serial Module Baud RatesDistance for EIA/TIA-232 EIA-530 Distance for USB Rate bps Feet MetersIsdn BRI Connections CSU/DSU ConnectionsLow-Capacitance Cable For more information on BRI WICs, refer to Cisco.comInternal services module ISM About ModulesInternal Modules Router’s internal components include the followingPlug-In Modules Setting Up the Chassis Chassis Airflow DiagramChassis Grounding Setting the Chassis on a DesktopWall-Mounting the Chassis 253711 Procedure Wall-Mounting Features on the Cisco 1941 RouterRack-Mounting the Chassis Attaching Rack-Mount Brackets to Cisco 1900 Series Routers253712 Installing the Chassis Ground Connection 9shows how to attach the brackets to the rack11 Chassis Ground Connection on the Cisco 1941 Router Connecting WAN and LAN Cables Safety MessagesOL-19084-02 Ports and Cabling Port Type, Color Connected to CableConnection Procedures and Precautions Connecting to a Console Terminal or ModemConnecting to the Console Port with Microsoft Windows 12 Connecting the Console Cable to the Router Connecting to the Console Port with Mac OS Connecting to the Console Port with LinuxOpen the Linux Terminal window Connect the Linux USB port to the routerInstalling the Cisco Microsoft Windows 2000 USB Driver Installing the Cisco Microsoft Windows XP USB DriverBefore You Begin Procedure Uninstalling the Cisco USB Driver Installing the Cisco Microsoft Windows Vista USB DriverUsing the Add Remove Programs Utility Before You BeginUninstalling the Cisco Microsoft Windows Vista USB Driver Using the Setup.exe ProgramConnecting to the Auxiliary Port 13 Connecting a Modem to the RouterConnecting Power Connecting to AC PowerConnecting to DC Power DC Wiring Requirements for Cisco 1900 Series RoutersWire Size Wire Terminal Lug Protection DC InputCisco 1900 Series Router Wiring Procedure for DC Input 14 DC Power Wire Connection 15 Installing the Plastic Safety Cover OL-19084-02 Powering up the Router Checklist Before Powering Up the Cisco RouterPowering Up the Cisco Router Related InformationPerforming the Initial Configuration on the Router Using the Cisco Setup Command Facility5-6 to configure the router Verifying the Front Panel LED IndicationsEnter a hostname for the router To proceed using the setup command facility, enter yesSystem displays a summary of the available interfaces System creates the following configuration command script System displays the user promptUsing Cisco Configuration Professional Express Using the Cisco CLI-Manual ConfigurationInitial CLI Configuration When the system message appears on the router, enter noType enable to enter privileged Exec mode Press Return to bring up the Router promptConfiguring the Router Hostname Command or Action PurposeVerify that the router prompt displays your new hostname ExampleConfiguring the Enable and Enable Secret Passwords Optional Returns to privileged Exec modeConfiguring the Console Idle Privileged Exec Timeout Command collection mode That the privileged Exec command interpreter waits untilExample shows how to specify no timeout. Setting Exec-timeout value to 0 will cause the router toFor IP Configuring Gigabit Ethernet InterfacesLearn which type of Ethernet interface is on your Configuring the GigabitEthernet Interface Sample Output for the show ip interface brief CommandSpecifying a Default Route or Gateway of Last Resort Configuring IP Routing and IP ProtocolsRouterconfig# ip routing Gateway of Last ResortSpecifying a Default Route Example Sample Output for the show ip route CommandStarts the line configuration command collection mode for Virtual terminal lines vty for remote console accessMake sure that you configure all vty lines on your Line vty ? commandConfiguring the Auxiliary Line ExampleVerifying Network Connectivity Auxiliary lineConnected host for each configured interface If you want to test the vty line password, perform thisDiagnoses initial network connectivity To verify connectivity, ping the next hop router orSaving Your Router Configuration Saving Backup Copies of Configuration and System ImageSaves the running configuration to the startup ConfigurationCopying the Startup Configuration to a Tftp Server Example Copying from Flash Memory to a Tftp Server ExampleVerifying the Initial Configuration NvramOL-19084-02 Activating a New Software Package or Feature Getting Software Licenses for the RouterRMA License Transfer 1shows the steps for software activationAdditional Information OL-19084-02