Cisco Systems 1900 Series manual Verifying Network Connectivity, Auxiliary line

Chapter 5 Configuring the Router

Performing the Initial Configuration on the Router

•Configuring Dialout Using a Modem on the AUX Port, sample configuration

•Configuring AUX-to-AUX Port Async Backup with Dialer Watch, sample configuration

•Modem-Router Connection Guide, tech note

SUMMARY STEPS

1.enable

2.configure terminal

3.line aux 0

4.See the tech notes and sample configurations to configure the line for your particular implementation of the auxiliary port.

DETAILED STEPS

	Command or Action	Purpose
Step 1
	enable	Enables privileged EXEC mode.
		• Enter your password if prompted.
	Example:
	Router> enable
Step 2
	configure terminal	Enters global configuration mode.
	Example:
	Router# configure terminal
Step 3
	line aux 0	Starts the line configuration command collection mode for
		the auxiliary line.
	Example:
	Router(config)# line aux 0
Step 4
	See the tech notes and sample configurations to	—
	configure the line for your particular implementation
	of the auxiliary port.

Verifying Network Connectivity

This section describes how to verify network connectivity for your router.

Prerequisites

•Complete all previous configuration tasks in this chapter.

•The router must be connected to a properly configured network host.

SUMMARY STEPS

1.enable

2.ping [ip-address hostname]

3.telnet {ip-address hostname}

	Cisco 1900 Series Hardware Installation
OL-19084-02		5-19